- Extron Electronics Interfacing Switching and Distribution User's Manual

CVEQ 100 and SVEQ 100 Series • Installation
Installation, cont’d
2-10
CVEQ 100 and SVEQ 100 Series • Installation
2-11
Outside
Inside
SVEQ 100 back of the rack installation example
Installing the CVEQ 100 AAP/SVEQ 100 AAP
The CVEQ 100 AAP and SVEQ 100 AAP are double space high
architectural adapter plate products that mount in a wall or
furniture using an optional mounting frame.
1. Remove power from the line driver by disconnecting the
power supply.
2. Attach the mounting frame to wall box.
3. Route output cables through the wall box and frame and
connect them to the line driver.
4. Mount the line driver to the mounting frame with machine
screws, as shown in the following illustration. Take care
not to damage the output cable(s), which t through the
mounting frame and into the wall box.
Extron
CVEQ 100 AAP
Composite Line Driver
Connector
Cable
Clamp
AAP 102
AAP 102
#4-40 Nut w/ Captive
Washer
AUDIO IN
VIDEO
IN
L
R
CVEQ 100 AAP
Mounting the line driver to a wall box
5. Reconnect the power supply, cable all products (see
chapter 3), and restore power to the equipment.