Installation Guide RGB 460xi /470xi SC Series Installation Guide Steel City Floorbox-Mounted Interface www.extron.com Extron Electronics, USA Extron Electronics, Europe Extron Electronics, Asia Extron Electronics, Japan 1230 South Lewis Street Anaheim, CA 92805 USA 714.491.1500 Fax 714.491.1517 Beeldschermweg 6C 3821 AH Amersfoort The Netherlands +31.33.453.4040 Fax +31.33.453.4050 135 Joo Seng Road, #04-01 PM Industrial Building Singapore 368363 +65.6383.4400 Fax +65.6383.
Precautions Safety Instructions • English This symbol is intended to alert the user of important operating and maintenance (servicing) instructions in the literature provided with the equipment. This symbol is intended to alert the user of the presence of uninsulated dangerous voltage within the product's enclosure that may present a risk of electric shock. Caution Read Instructions • Read and understand all safety and operating instructions before using the equipment.
Table of Contents About this Guide ....................................................................... 1 Installation Overview ............................................................. 2 Installation Instructions ........................................................ 3 Preparing the site and cables ................................................... 3 Mounting the faceplate to the floorbox ................................ 4 Specifications ..........................................................
Table of Contents, cont’d About this Guide This guide contains instructions for mounting eight different Extron computer interfaces and an adapter plate in Steel City® floor boxes. The interfaces are standard RGB 400xi series interfaces tailored to fit in the different Steel City floor boxes. The Steel City floorbox-mountable interface models are: • xi SC-AFM2 and RGB 472xi SC-AFM2 — RGB 460xi 300 MHz (-3dB) bandwidth interfaces configured for installation in an AFM 2 floor box.
Installation, cont’d Installation Overview CAUTION Installation Instructions Installation and service must be performed by authorized personnel only. These products must be used with UL approved electrical boxes. CAUTION Install the interface as follows: 1 2 Select the installation location and install the electrical floorbox. Refer to the documentation that was included with the floorbox.
Installation, cont’d 4. For the SC-AFM8 adapter plate only, secure the device(s) to be installed to the front of the faceplate with machine screws (figure 2). 4. Mount the faceplate to the knockout box. a. xi SC-AFM2 and For the RGB 460xi xi SC-AFM2, hook the two locking tabs on RGB 472xi the bottom of the faceplate into the slots on the bottom of the box is mounted. Secure the faceplate to the top of the floorbox with the included 8-32 x 1/4” machine screw (figure 3). 8-32 x 1/4" Machine Screw H.
Installation, cont’d Specifications 10-32 x 3/8" Machine Screw This guide shows power requirements and physical specifications only. For electrical and functional specifications, refer to the RGB 400xi Series User Manual, Part #68-542-01 or the RGB 470xi Series User’s Manual, Part #68-661-01, depending on the specific product you are using.
Installation, cont’d Cables Included Parts These items are included in each order for the indicated interface: Included parts Part number Part number VGA M6’ MHR 26-238-01 VGA M3’ MHRA (with audio) 26-490-01 RGB 460xi SC-AFM2 gray 60-463-01 VGA M6’ MHRA (with audio) 26-490-02 -or- RGB 460xi SC-AFM4 gray 60-464-01 VGA M12’ MHRA (with audio) 26-490-03 -or- RGB 464xi SC-AFM6 gray 60-465-01 -or- RGB 468xi SC-AFM6 gray 60-466-01 -or- RGB 472xi SC-AFM2 gray 60-516-01 -or- RGB 472xi SC-AFM4
Installation, cont’d 10 xi xi SC Series • Installation Guide RGB 460xi xi/470xi