- Extron Electronics Network Device Installation Guide

SMB 203 L and SMB 205 L Installation GuideSMB 203 L and SMB 205 L Installation Guide
SMB 203 L and SMB 205 L Installation Guide
N For illustration purposes, the following steps use the SMB 205 L as an example, but
the instructions apply to the SMB 203 L as well.
1. For tabletop placement, the four included adhesive rubber feet may be applied to
the bottom corners of the mounting base.
2. For angled installations, securely mount the SMB using the two keyhole slots
and/or mounting holes in the mounting base.
Mount the SMB using the keyhole slots and/or
the mounting holes:
• Position the SMB at the
desired location.
• Mark the holes on the
surface to be drilled. See
the illustration at right.
3. Drill 1/16" pilot holes for
the keyhole slots or the
mounting holes. For the
keyhole slots, insert screws
into the pilot holes, but
do not tighten them down until the SMB is slid into position. For the mounting
holes, position the SMB over the holes and secure the SMB into position.
4. Cables may access the SMB through the AAP openings in the rear panel and the
bottom mounting base.
If cables are to access the SMB through the rear panel, use the rear panel AAP
openings, as shown here. AAP modules are sold separately.
Rear
Mounting
Nuts
AAPs
(not included)
Optional Split AAP
Mark pilot holes
for keyhole slot (1/16”)
or mounting hole (1/16”).
Mark pilot holes
for keyhole slot (1/16”)
or mounting hole (1/16”).
Extron Electronics, USA
1230 South Lewis Street
Anaheim, CA 92805
800.633.9876 714.491.1500
FAX [phone]
Extron Electronics, Europe
Beeldschermweg 6C
3821 AH Amersfoort, The Netherlands
+800.3987.6673 +31.33.453.4040
FAX [phone]
Extron Electronics, Asia
135 Joo Seng Rd. #04-01
PM Industrial Bldg., Singapore 368363
+800.7339.8766 +65.6383.4400
FAX [phone]
Extron Electronics, Japan
Kyodo Building, 16 Ichibancho
Chiyoda-ku, Tokyo 102-0082
Japan
+81.3.3511.7655 FAX [phone]
www.extron.com
Number of accessible AAP openings
SMB 203 L ........................... 1 double-space (back), 1 double-space (bottom)
SMB 205 L ........................... 2 double-space (back), 2 double-space (bottom)
Included blank AAP plates
SMB 203 L ........................... 1 double-space
SMB 205 L ........................... 2 double-space
Furniture mounting holes ............ 4 (2 are slotted)
Cable management lance punches
SMB 203 L ....................................... 2
SMB 205 L ....................................... 3
Front angle ..................................... 36° from vertical, 54° from horizontal
Product weight
SMB 203 L ........................... 1.1 lbs (0.5 kg)
SMB 205 L ........................... 1.6 lbs (0.7 kg)
Shipping weight ............................ 2 lbs (1 kg)
Vibration ........................................ ISTA 1A in carton (International Safe Transit
Association)
Warranty ........................................ 3 years parts and labor
N
Specifications are subject to change without notice.
68-1497-01 Rev. A
11 07
Models
Models Part number
SMB 203 L (black, white) 60-942-02, -03
SMB 205 L (black, white) 60-943-02, -03
Included Parts
These items are included in each order of the SMB 203 L or SMB 205 L.
Included parts Replacement
part number
Adhesive rubber feet (4)
Blank double-spaced AAP (1), SMB 203 L only
70-090-12 (black)
or
70-090-22 (white)
Blank double-spaced AAP (2), SMB 205 L only
70-090-12 (black)
or
70-090-22 (white)
14