User`s manual

SCP 150 • Introduction
Introduction
SCP 150
2
Chapter Two
Installation and Operation
Installation Overview
Installing or Replacing Button Labels
Mounting Options
UL Requirements
Preparing the Site
Installing the Electrical Box
Cabling the Rear Panel
Pre-installation Testing/Troubleshooting
Mounting the SCP
Front Panel Features
Resetting to Factory Firmware Version
1-2
About the SCP 150, SCP 150 AAP, and SCP 150 L
The Extron SCP 150, SCP 150 AAP, and SCP 150 L are hardwired
remote control panels for the Extron System 5 IP switcher. All
models replicate the switcher’s volume, input switching, and
system controls. The SCP 150 AAP also provides four spaces for
the addition of optional architectural adapter plates (AAPs) or
audio, relay, or IR control modules (ACMs, RCMs, IRCMs).
Unless otherwise noted or implied, the term “SCP” refers to all
three models of the SCP 150 (SCP 150, SCP 150 AAP, and
SCP 150 L).
The System 5 IP cannot be configured from the SCP
control panels. All switcher setup must be done from the
switcher or via RS-232. Refer to the System 5 IP
manual for information on setting up the switcher.
The System 5 IP supports up to two SCPs. Up to four control
modules and one IR Link infrared signal repeater can be daisy-
chained with the panels. The SCP accepts signals from the
optional IR 402 remote control.
The panels can be mounted in or on walls or furniture. The
SCP 150 mounts in a 2-gang electrical box, surface mount box,
or mounting bracket and the SCP 150 AAP mounts in a 4-gang
electrical box, surface mount box, or mounting bracket.
The SCP 150 L fits into a compact lectern space, into a wall, or
into an Extron UCM RAAP or UCM 10X8P faceplate.
Features
Gray, black, white, and RAL9010 white faceplates — The SCPs
are available in four colors for integration into a variety
of environments.
Customizable, illuminated buttons — The panel buttons can be
easily identified, even in low light.
System expandability — The panels can be daisy-chained with
Extron’s control modules (IRCMs, ACMs, RCMs) and an
IR Link to provide versatile remote control options.
Furniture and wall mountability — The SCPs can be mounted
in or on walls or furniture with the use of optional
electrical boxes, surface mount boxes, or mounting
brackets.