User`s manual

TP Receivers • Installation and Operation

2-11

7. For under-surface mounting, align the mounting screws

with the slots in the brackets and place the receiver against

the surface, with the screws through the bracket slots.

8. For under-surface mounting, slide the receiver slightly

forward or back, then tighten all four screws to secure the

switcher in place.

Projector mounting

All of the receiver models can be mounted on a projector

bracket using the appropriate optional mounting bracket, the

Extron Pole Mount Kit for One 1/4 Rack Width Product (part

#70-217-01) (TP R 15 HD A) or Pole Mount Kit for One 1/4 or

1/2 Rack Width Product (part #70-077-04) (all other models).

Secure the mounting bracket to the receiver using two machine

screws in the side of the receiver (TP R 15HD A) or the three

#8 machine screws provided (all other models). Secure the

receiver to a projector mount or other surface by inserting the

mounting bolt through the bracket’s slotted hole (gure 2-6).

TP R 15HD A

C SYNC

SOG

C VIDEO

N/C

AUDIO

OUTPUT

AV INPUT

RGB

POWER

15V

.34A MAX

Mounting

Bolt

Projector

Mounting

Bracket

Figure 2-6 — Projector bracket mounting a receiver