Setup guide
4
68-2007-50 Rev. A
08 13
Extron Headquarters
+1.800.633.9876 (Inside USA/Canada Only)
Extron Asia
+65.6383.4400
Extron China
+86.21.3760.1568
Extron Korea
+82.2.3444.1571
Extron Europe
+31.33.453.4040
Extron Japan
+81.3.3511.7655
Extron Middle East
+971.4.299.1800
Extron India
+91.80.3055.3777
© 2013 Extron Electronics — All rights reserved. All trademarks mentioned are the property of their respective owners. www.extron.com
Basic SIS Commands
The XTP SR HDMI can be congured with specic SIS commands via an RS-232 or USB connection. Use the Extron DataViewer utility or a
control system to send SIS commands and receive responses. The following table identies a selection of SIS commands (for a full list of SIS
commands and variable denitions, see the XTP SR HDMI User Guide, available on the Extron website, www.extron.com).
Command ASCII Command
(Host to Device)
Response
(Device to Host)
Additional Description
Input configuration
Execute Auto-Image
A
Img
]
Execute a one time Auto-Image.
Picture adjustments
Mute video
1B
Vmt1
]
Mute video and display black video.
Unmute video
0B
Vmt0
]
Unmute the video.
Output configuration
Set scaler output rate
EX3!RATE} RateX3!]
Set the output resolution and refresh rate.
View scaler output rate
ERATE} RateX3!]
View the selected output resolution and refresh rate.
Set a test pattern
X1!J TstX1!] Set the test pattern to X1!.
View the test pattern
J
Tst
X1!]
View the current test pattern status.
Audio configuration
Mute audio
3Z
Amt3
]
Mute all audio outputs.
Unmute audio
0Z
Amt0
]
Unmute all audio outputs.
Set volume level
X1&V VolX1&] Set the output volume to X1&.
View volume level
V
Vol
X1&]
View the current volume setting.
Advanced configuration
Enable executive mode
1X
Exe1
]
Lock the front panel.
Disable executive mode
0X
Exe0
]
Unlock the front panel.
Set aspect ratio to Fill
E1ASPR} Aspr1]
Set the input aspect ratio to ll the entire output
screen.
Set aspect ratio to Follow
E2ASPR} Aspr2]
Set the input aspect ratio to match the native value.
View aspect ratio setting
EASPR} AsprX2#]
View the current aspect ratio setting.
Reset
Reset to factory default
EZXXX} Zpx]
Resets all user settings back to factory defaults.
NOTES:
X1! = Test pattern (0 = off [default], 1 = crop, 2 = alternating pixels, 3 = crosshatch, 4 = color bars, 5 = grayscale)
X1& = Volume (0-64, where 64 = default)
X2# = Input aspect ratio (1 = Fill [default], 2 = Follow)
X3! = Output scaler resolution and refresh rate (see the table below for a selection of resolutions and refresh rates or the XTP SR HDMI User
Guide for a full list)
SIS Variable X3! for EDID or Output Resolution and Refresh Rate Combination (Where X3! = 10 through 90)
Resolution 23.98 Hz 24 Hz 25 Hz 29.97 Hz 30 Hz 50 Hz 59.94 Hz 60 Hz 70 Hz
1024x768 19 20 21
1280x800 31 32 33
1280x1024 34 35 36
1680x1050 57 58
1920x1200 61 62
720p 66 67 68 69 70 71*
1080p 75 76 77 78 79 80 81 82
* = default