User guide

Command and Response Tables for Receiver SIS Commands
The following commands are for direct connection to the XTP R HDMI (refer to the XTP
matrix switcher user guide for commands that can be sent from the matrix to endpoints).
Command ASCII Command
(Host to Device)
Response
(Device to Host)
Additional Description
Audio Configuration
Volume control
Set volume
X1!V VolX1!] Set the output volume to X1!.
Increment volume
+V
Vol
X1!]
Increase the audio volume.
Decrement volume
-V
Vol
X1!]
Decrease the audio volume.
View volume
V
Vol
X1!]
View current volume setting.
Audio mute
Mute all
3Z
Amt3
]
Mute the audio.
Unmute all
0Z
Amt0
]
Unmute the audio.
View mute status
Z
Amt
X1%]
View the mute status.
Advanced Configuration
Relay control
Pulse relay
X1&*3*X1(O RlyX1**X@] Pulse relay X1* for X1( ms.
Toggle relay
X1&*2O RlyX1**X@] Toggle relay X1*.
Turn relay on
X1&*1O RlyX1**1] Turn relay X1* on.
Turn relay off
X1&*0O RlyX1**0] Turn relay X1* off.
View relay status
X1&O RlyX1**X@] View the on or off status of relay X1*.
Mute video to black
Mute video to black
1B
Vmt1
]
Mute the video and display black video.
Unmute video
0B
Vmt0
]
Unmute the video.
View video mute status
B
Vmt
X*]
View the video mute setting.
Reset mode
Reset to factory defaults
EZXXX} Zpx]
Resets all user settings back to factory
defaults.
NOTE: X@ = Enable or disable 0 = off or disable
1 = on or enable
X* = Video mute 0 = off or disable (default)
1 = on or enable (mute to black)
X1! = Audio volume 0 - 64 (64 = default)
X1% = Audio mute 0 = unmute all
3 = mute all
X1* = Relay number 1 = relay 1
2 = relay 2
X1( = Pulse time 1-65,535 (in 16 ms increments)
XTP T HDMI Transmitter and XTP R HDMI Receiver • SIS Configuration and Control 21