User guide

Installing Firmware with Firmware Loader
1. Connect the host device to the front panel USB port.
2. Open Firmware Loader and establish a connection between the computer and the
device. The Add Device... dialog box opens.
Figure 21. Add Device... Dialog Box
3. Select XTP T HDMI or XTP R HMDI from the Device Name drop-down list.
4. Select the method of connection from the Connection Method drop-down list.
5. Depending on the connection method, additional options appear. Make the appropriate
selections for the current connection method.
6. Click Connect.
7. Click Browse in the New File Firmware (Optional) section.
8. On the Open dialog box, select the new firmware file, which has an .S19 extension, and
click Open.
ATTENTION: Valid firmware files must have the file extension .S19. A file with
any other extension is not a firmware upgrade for this device and could cause the
device to stop functioning.
9. Click Add. The Add Device... dialog box closes and the device and firmware are listed in
the Firmware Loader main window.
10. Click Begin to start the upload process.
11. Close Firmware Loader when the Remaining Time field shows 00.00.00, the
Progress column is 100%, and the Status field is completed.
XTP T HDMI Transmitter and XTP R HDMI Receiver • Reference Information 32