Instructions / Assembly

FORTRESS
®
OSHA Stair System Installation Manual Page 2 of 9
INTRODUCTION
Throughout this manual, the term “system” refers to the entire FORTRESS® OSHA Stair System, including its
components, hardware, and any/all optional equipment.
SYMBOLS
The WARNING symbol indicates a potentially hazardous condition/situation. The safety warnings
throughout this manual, and on your equipment, if any, are for the protection of people and property.
Failure by any operator to abide by safety warnings will result in a waiver of all liabilities, loss of your
warranty, and could result in equipment damage and or failure, property damage, risk of serious bodily
injury, and or death. The symbol may appear in various colors and in conjunction with other symbols and
with or without the written word “WARNING”.
The NOTE symbol indicates important information. Failure to obey all notes could result in improper
operation, less-than-optimum equipment performance, and at the sole discretion of the equipment
manufacturer, may void your warranty. The symbol may appear in various colors and in conjunction with
other symbols and with or without the written word “NOTE”.
WARNINGS
Rated Load: 1,000 lbs.; never exceed Rated Load.
Prior to installation and use, read and follow all instructions, warnings, and labels. Following all
instructions and obeying all warnings before and during use is necessary for safe operation. Do not
remove labels. For additional information or to obtain copies of instructions or labels, call 1-800-451-1903.
System owner(s) is/are required to maintain all labels and manuals in legible condition; this is essential for
safe operation. If any labels or manuals are missing, damaged, or become illegible, they must be replaced.
This product must be installed by a qualified installer and maintained as specified in this manual and per
your applicable local codes. Consult a contractor or your local Authority Having Jurisdiction (AHJ) for
information.
Handrails are required and must be installed.
Only use components supplied by the manufacturer with the system.
Regular inspection of the system is required to identify worn, loose, or damaged parts, which must be
immediately repaired by your original installer or a qualified technician. Failure to do so may result in
serious injury.
Do not use the system if it is damaged or unstable.
Do not attempt to repair or modify any portion of the system without the support of your original installer
or a qualified technician.
Ensure that the landings the system will be placed on are substantial and of sound construction.
Use only if the secure, unobstructed, level landings can support the Rated Load of the system (1,000 lbs.).
Before each use, confirm the system is secure, anchored, and installed per the instructions. Contact your
installer for any necessary adjustments.
Use only if sufficient maneuvering room is available at both ends of the system to assure safe travel when
entering and exiting the system.
The system may be slippery in wet conditions; use caution as traction may be reduced.
Before each use, remove ice, snow, dirt, leaves, and other debris on contact surfaces. Please refer to
‘MAINTENANCE AND SAFETY’ and ‘DEICING’ sections in the installation manual for more information.
Do not lean on, walk on, or otherwise bear weight on the system until installation is complete.
Do not run, jump, or play on or around the system.
Do not sit, stand, or climb on handrails.
Do not place anything on, under, or attach anything to the system including, but not limited to, planters,
lights, decorations, etc.
Improper use of the system could result in serious injury.
Always exercise caution when handling, installing, and or using the system.