Specification

ARCHITECTURAL SPECS
Part 1 – General
1.1 DESCRIPTION OF PRODUCT
a. The product described herein, manufactured by EZ-ACCESS® is an aluminum modular ramp
consisting of ramp sections, platforms, rails, and supports that are selected to provide adequate
ramping height.
1.2 QUALITY ASSURANCE
a. The ramp may be subject to state, local, and city approval prior to installation and subject to
inspection after installation.
1.3 REFERENCE CODES
a. AMERICANS WITH DISABILITIES ACT HANDBOOK (published by the Equal Employment Opportunity
Commission and the U.S. Department of Justice, publication EEOC-BK-19).
1.4 SUBMITTALS
a. Shop drawings by contractor or manufacturer’s literature for approval. Drawings shall indicate
layout, unit locations, unit identification, connections details, support items, and dimensions.
b. A sample of the ramp treads showing slip resistant ramp surfaces.
1.5 DELIVERY AND HANDLING
a. The contractor shall inspect the components upon delivery to ensure that the proper materials
have been received and are not damaged or defective. Damaged or defective materials shall be
removed from the site.
1.6 FIELD MEASUREMENTS
a. Verify that field measurements are as indicated on the placement of plans.
1.7 WARRANTY – LIMITED LIFETIME
a. The manufacturer shall have in writing a limited lifetime warranty against any defect in materials
and workmanship.