Instructions / Assembly

Gloves

ladder

Metal Shears

Safety Equipment

Bottom Adjustable Tube

Ceiling Ring

TOOLS & PARTS

At the ceiling, slide the temporary shim out of your

way and pull tube section back out of the ceiling.

Wearing protective gloves, carefully trim away the

excess aluminum tubing using your felt pen marks as

a guide.

Remove the protective ﬁlm from the inside of the

tubing.

Place the tube section back into the ceiling making

sure to align and center it inside the roof ﬂashing

collar. Place shim back across the cut-out.

Open the diuser assembly box and separate the

ceiling ring from the diuser. Install only the Ceiling

Ring into the cut-out.

You can now remove the shim from the ceiling and

allow the tube to rest centered over the ceiling ring.

Section-10b

Cathedral Ceiling/Short Shaft Installation