SDS

新 利 達 電 池 有 限 公 司
NEW LEADER BATTERY LIMITED.
Safety Data Sheet for Alkaline Battery 0.%Hg (LR) Series
29 CFR 1910.1200
Document Number : SDS - LR Series **Not for recharge** (Version : 2019)
Prepared 1.1.2019
Additional information : The lists that were valid during the creation were used as basis.
Based on the composition shown in Section 3, the following measures are suggested for occupational
safety measure.
Appropriate engineering controls:
Keep away from foodstuffs beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of works
Avoid contact with the eyes and skin
See Section 7 for information about design of technical facilities.
Personal protective equipment:
Breathing equipment:
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use
respiratory protective device that is independent of circulating air.
Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/the substance/the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/the preparation/the
chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation.
Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and
varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of
the glove material cannot be calculated in advance and has therefore to be checked prior the application.
Penetration time of glove material:
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be
observed.
Eyes protection:
Tightly sealed goggles