Use & Care Guide and Installation Instructions
13
LED LIGHTING UNIT
• LED lights must be replaced by Faber factory authorized
service.
Cleaningmetalgreaselters
The lters must be cleaned every 2 months of operation,
or more frequently for particularly heavy usage, and can
be washed in a dishwasher.
• Remove the Filters one at a time, pushing them
towards the back of the unit and at the same time
pulling downward.
• Wash the Filters without bending them, and leave them
to dry completely before replacing. (If the surface of
the lter changes colour as time goes by, this will have
absolutely no effect on the efciency of the lter itself.)
• Replace, taking care to ensure that the handle faces
forwards.
• No water can be present in lters before installing
back in hood.
Replacing Activated Charcoal Filter
The lter is not washable and cannot be regenerated, and must
be replaced approximately every 4 months of operation, or more
frequently for particularly heavy usage.
• Remove the Filters one at a time, pushing them towards
the back of the unit and at the same time pulling downward.
• Remove the saturated charcoal lter by releasing the xing
hooks.
• Fit the new lter and fasten it in its correct position.
• Replace, taking care to ensure that the handle faces forwards.
CAUTION: When used in recirculation mode, to Reduce
the Risk of Fire and Shock use only conversion kit Model
FILTER 1 or FILTER1LL.
1
2