Installation Instructions

It is important for the dishwasher to rest firmly on the floor, in a perfectly upright position. It should

then be levelled to rectify the effect of any unevenness of the floor.

Use a spirit level.

If the appliance is to be positioned under a worktop, top can be removed or left in position.

Fitting a dishwasher into

a row of cupboards.

When fitting the

dishwasher into a row of

kitchen cupboards with a

continuos plinth:

Unscrew and remove

the base.

Loosen and remove su-

pport legs.

Screw the adjustable

legs into the dishwasher.

Refit the base to the

cupboards and, if

necessary, make any

haight adjustment to

plinth to the required

height to allow the

dishwasher to fit properly

behind.

Then pull the support

blocks for the cover

outwards and

backwards.

POSITIONING

If you wish to remove

the cover, you may do

this by detaching the

rear part of the same.

Remove the rear

counterweight and pull

out the insulating

blanket, if the model

has one.

Fit the dishwasher into the

space. Adjust it to the

worktop until the top part of

the dishwasher is touching

the lower part of the cabinet

worktop.

LEVELLING

LEVELLING AND POSITIONING