Installation Instructions

59
English
RINSE-AID
d
You should not use salt if your dishwasher does not
need it. In this case, the pilot light will remain on at
all times.
IMPORTANT
When does the salt need replacing?
When salt is needed, the salt indicator will light up steadily on the
display . When the salt has been added, the indicator light will
switch off.
Mensaje en pantalla
The rinse-aid helps drying and prevents drops of water from clinging to utensils after washing.
The rinse-aid container is located on the inside of the door, next to the detergent container.
It has a 4-position
dispenser for adjusting the
amount of rinse-aid to the
water quality (the
dispenser is set at
position 2 at the factory).
If you notice drops of
water on utensils,
increase the position of
the rinse-aid dispenser. If
the utensils have white or
sticky lines, lower the
position.
Once the level of the
dispenser has been
set, fill the container
to the top, but do not
overfill it. If this
occurs, clean the
spillage with a cloth.
RINSE-AID CONTAINER
DISPENSER
a
a
A greater amount of rinse-aid does not necessarily mean
better results. In fact, too much rinse-aid can lead to
water marks.
IMPORTANT
d
Close the lid tight and
clean the salt around
the container.
When the salt container needs
filling, you should always do it
before a wash and not afterwards.
auto 55-65
O
c