Installation Instructions

Press the selector dial or
press the Start button .
Message on displayAction
4.3. Programme Phases
➊
Clock time: the present time.
➋
Time remaining for the wash
programme to end.
➌
Programme phases: prewash,
wash and dry.
➍
More detailed animation of the
programme phase.
➎
Salt indicator.
➏
Rinse aid indicator.
➐
Additional function indicators.
If you have selected a stop time,
the information appearing on the
display before the programme begins
will be as follows:
➊
Stop time option selected
flashing.
➋
Programme.
➌
Delayed programming indicator.
1. Carefully open the dishwasher door.
2. Place the dish in the dishwasher.
3. Close the dishwasher door (a long three-second beep will sound).
If the dishwasher is functioning and you wish to place another dish in the dishwasher:
➊ ➋➌
➌➍
➊➋ ➎➏ ➐
For safety reasons, in some cases a certain time needs to elapse before the programme starts up again.
Cancelling the delay.
To cancel the delay, switch off the dishwasher by pressing the ON/OFF button and holding it
down for one second.
Select the time you
want the wash
programme to END.
Turn the selector dial clockwise. Adjustment
is by half-hour intervals.
Validate the stop
time and start up the
dishwasher.
All the washing information appears
on the display:
auto 55-65
O
c
HORA STOP
AUTO
AUTO 55-65
O
C