Operation Manual

59
English
6
CLEANING BEFORE USE
5
CHOOSING A LANGUAGE
Some display model
dishwashers allow you to customise
the menus on the display in your
preferred language. To do this,
proceed as follows:
b
Dial model
b
Button model
c
This is to check the installation, the connections and the drain outlet, as well as to completely
wash the interior before running a wash programme.
Press and hold down the On/Off
(see pages 69-70) button for two
seconds (until you hear the
confirmation beep). The pilot light,
display or screen will light up on the
front panel of the dishwasher,
depending on the model.
Select programme 1 (prewash), with
no dishes or detergent in the
dishwasher.
Press and hold down the Start button
until you hear the confirmation beep.
c
a
b
Once the dishwasher has been installed correctly, it should be first used on prewash programme:
ba
To activate the
LANGUAGE mode:
Press and hold
down the Top
Load/Bottom Load
button for at least
three seconds.
To change or select a
language: Press the
Top Load/Bottom
Load button. A new
language will appear.
a
b
c
c
To validate the
LANGUAGE:
Press the Start
button.
The language has now
been selected.
a
a