Operation Manual

a
c
b
2
CLEANING THE SPRINKLERS
4
CLEANING THE OUTSIDE OF THE APPLIANCE
Clean the outside with a cloth and soapy water.
The third sprinkler is
removed by pressing
upwards on it and then
unscrewing it.
The top sprinkler is fitted
to the top basket. It should
be totally unscrewed to
remove it.
The bottom sprinkler is
removed by turning the
lower screw to the left to
loosen it and then pulling
upwards on the sprinkler.
Rinse the sprinklers under the
tap and clean them with a non-
scratch sponge.
The water outlet holes must
be kept clean. Unblock any
holes that are obstructed.
Then put the sprinklers back.
The dishwasher should be cleaned every three months to remove any dirt from the inside of the
machine. You will need to use machine cleaner and specific products for cleaning dishwashers
(follow the manufacturer’s instructions for use).
3
CLEANING THE INSIDE OF THE DISHWASHER
IMPORTANT
For safety reasons, make
sure the appliance is not
in operation while it is being
cleaned.
The third sprinkler (depending on the model), the top sprinkler and the bottom sprinkler should be
cleaned every three months. To remove the sprinklers for cleaning:
Before any cleaning or maintenance operations, unplug
the dishwasher from the mains.
IMPORTANT
Use non-scratch and
non-abrasive products.
Dry with a cloth.
a
b
c