Product Manual

SIDE VIEW
MOUNTING
LOCATION
MINIMUM
DISTANCE
TO WALL
6
1
/2 in.
(165 mm)
1
/2 in.,
3
/4 in. (2)
(12.7 mm, 19.1 mm)
1
3
/4 i
n.
(
44.5mm)
1
4 in. (356 mm)
12
1
/2 in.
(318 mm)
FRONT VIEW
1
3 in.
(
330.2 mm)
12
5
/8 in.
(321 mm)
Cleaning the Fan and Motor
Remove the protective grille from the rear of the heater. This
provides access to the fan and motor. Wipe off the fan and
motor with a soft cloth or brush. The fan motor does not require
lubrication. Replace protective grille. (See Fig. 9.)
FAN AND MOTOR
P
ROTECTIVE GRILL
Figure 9
HEATING ELEMENT
Figure 8
USE CARE TO PREVENT DAMAGE TO INTERNAL HEATER
WIRING WHEN CLEANING ELEMENT. MAKE SURE ALL
CONNECTIONS REMAIN TIGHT AND ALL WIRING IS
ROUTED AWAY FROM ELEMENT FINS WHEN REASSEM-
BLING THE UNIT. ALLOWING WIRING TO TOUCH THE ELE-
MENT FINS COULD RESULT IN A FIRE HAZARD.
CAUTION
!
Dimension Data
Mounting Height, ft. (mm)
Min. Distance from
BTU per Contactor
Vertical Installation Horizontal Installation
Horizontal Air Mounting Hole to
Heater Rating and Voltage Hr. Phase Built-in Min. Max. Min. Max. Throw, ft. (mm) Wall, in (mm)
*5000 W @ 240V 17,065
4165W @ 240V 14,215 1 No 6’ 11’ 6’ 8’ 18’ **13”
3332W @ 240V 11,365 (1829) (3353) (1829) (2438) (5472) (330)
2500W @ 240V 8,533
*3750W @ 208V 12,799
3123W @ 208V 10,659 1 No 6’ 11’ 6’ 8’ 18’ **13”
2500W @ 208V 8,533 (1829) (3353) (1829) (2438) (5472) (330)
1874W @ 208V 6,396
*Heater is shipped from factory wired for these wattages. Heater can be field adjusted to the other wattages (Refer to “Adjusting the Heat
Output” on page 4.)
**48" (1219 mm) when heater air flow is between 45° downward and vertical.
SPECIFICATIONS
LIMITED WARRANTY
A
ll products manufactured by Marley Engineered Products are warranted
against defects in workmanship and materials for one year from date of
installation, except heating elements which are warranted against defects
i
n workmanship and materials for five years from date of installation. This
warranty does not apply to damage from accident, misuse, or alteration;
n
or where the connected voltage is more than 5% above the nameplate
voltage; nor to equipment improperly installed or wired or maintained in
v
iolation of the product’s installation instructions. All claims for warranty
work must be accompanied by proof of the date of installation.
T
he customer shall be responsible for all costs incurred in the removal or
reinstallation of products, including labor costs, and shipping costs
i
ncurred to return products to Marley Engineered Products Service
Center. Within the limitations of this warranty, inoperative units should be
r
eturned to the nearest Marley authorized service center or the Marley
Engineered Products Service Center, and we will repair or replace, at our
option, at no charge to you with return freight paid by Marley. It is agreed
that such repair or replacement is the exclusive remedy available from
Marley Engineered Products.
THE ABOVE WARRANTIES ARE IN LIEU OF ALL OTHER WAR-
RANTIES EXPRESSED OR IMPLIED. AND ALL IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PUR-
POSE WHICH EXCEED THE AFORESAID EXPRESSED WARRANTIES
ARE HEREBY DISCLAIMED AND EXCLUDED FROM THIS AGREE-
MENT. MARLEY ENGINEERED PRODUCTS SHALL NOT BE LIABLE
FOR CONSEQUENTIAL DAMAGES ARISING WITH RESPECT TO THE
PRODUCT, WHETHER BASED UPON NEGLIGENCE, TORT, STRICT
LIABILITY, OR CONTRACT.
Some states do not allow the exclusion or limitation of incidental or con
sequential damages, so the above exclusion or limitation may not apply
to you. This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state.
For the address of your nearest authorized service center, contact Marley
Engineered Products in Bennettsville, SC, USA, at 1-800-642-4328.
Merchandise returned to the factory must be accompanied by a return
authorization and service identification tag, both available from Marley
Engineered Products. When requesting return authorization, include all
catalog numbers shown on the products.
470 Beauty Spot Rd. East
Bennettsville, SC 29512 USA
HOW TO OBTAIN WARRANTY SERVICE AND
WARRANTY PARTS PLUS GENERAL INFORMATION
1. Warranty Service or Parts 1-800-642-4328
2. Purchase Replacement Parts 1-800-654-3545
3. General Product Information www.marleymep.com
Note: When obtaining service always have the following:
1. Model number of the product
2. Date of manufacture
3. Part number or description
Part No: 5200-2252-001
ECR 38178
03/09