Datasheet

ManualsBrandsFAIRCHILD SEMICONDUCTOR ManualsOptoelectronics & DisplaysDIP-8

Single-Channel: 6N135M, 6N136M, HCPL4503M

Dual-Channel: HCPL2530M, HCPL2531M — High Speed Transistor Optocouplers

6N13XM, HCPLXXXM Rev. 1.0.12

March 2014

Single-Channel: 6N135M, 6N136M, HCPL4503M

Dual-Channel: HCPL2530M, HCPL2531M

High Speed Transistor Optocouplers

Features

■

High Speed –1 MBit/s

■

Superior CMR – 10 kV/µs

■

Dual-Channel: HCPL2530M, HCPL2531M

■

CTR Guaranteed 0°C to 70°C

■

U.L. Recognized (File # E90700, Vol. 2)

■

DIN EN/IEC60747-5-5

– Ordering Option ‘V’, e.g., 6N135VM

■

5,000 V

RMS

(1 Minute) Isolation Rating

■

Superior CMR of 15,000 V/µs Minimum (HCPL4503M)

■

No Base Connection for Improved Noise Immunity

(HCPL4503M)

Applications

■

Line Receivers

■

Pulse Transformer Replacement

■

Output Interface to CMOS-LSTTL-TTL

■

Wide-Bandwidth Analog Coupling

Description

The HCPL4503M, 6N135M, 6N136M, HCPL2530M, and

HCPL2531M optocouplers consist of an AlGaAs LED

optically coupled to a high speed photodetector transistor.

A separate connection for the bias of the photodiode

improves the speed by several orders of magnitude over

conventional phototransistor optocouplers by reducing

the base-collector capacitance of the input transistor.

The HCPL4503M has no internal connection to the

phototransistor base for improved noise immunity.

An internal noise shield provides superior common

mode rejection of up to 50,000 V/µs.

Related Resources

■

www.fairchildsemi.com/products/opto/

■

www.fairchildsemi.com/pf/HC/HCPL0500.html

■

www.fairchildsemi.com/pf/FO/FODM452.html

■

www.fairchildsemi.com/pf/FO/FOD050L.html

Schematics Package Outlines

4 5

GND

HCPL2530M/HCPL2531M

4 5

GNDN/C

N/C

6N135M, 6N136M, HCPL4503M

Pin 7 is not connected in the

HCPL4503M

Figure 1. Schematics

Figure 2. Package Outlines

Summary of content (19 pages)

PAGE 1
Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M High Speed Transistor Optocouplers Features Description ■ High Speed –1 MBit/s The HCPL4503M, 6N135M, 6N136M, HCPL2530M, and HCPL2531M optocouplers consist of an AlGaAs LED optically coupled to a high speed photodetector transistor. ■ Superior CMR – 10 kV/µs ■ Dual-Channel: HCPL2530M, HCPL2531M ■ CTR Guaranteed 0°C to 70°C ■ U.L. Recognized (File # E90700, Vol. 2) ■ DIN EN/IEC60747-5-5 – Ordering Option ‘V’, e.g.
PAGE 2
As per DIN EN/IEC 60747-5-5. This optocoupler is suitable for “safe electrical insulation” only within the safety limit data. Compliance with the safety ratings shall be ensured by means of protective circuits. Symbol Parameter Min. Typ. Max. Unit Installation Classifications per DIN VDE 0110/1.
PAGE 3
Symbol Parameter Condition Value Units TSTG Storage Temperature -40 to +125 °C TOPR Operating Temperature -40 to +100 °C TSOL Lead Solder Temperature 260 for 10 s °C IF (avg) DC/Average Forward Input Current Each Channel(1) 25 mA IF (pk) Peak Forward Input Current Each Channel(2) 50% Duty Cycle, 1 ms P.W. 50 mA IF (trans) Peak Transient Input Current Each Channel ≤ 1 µs P.W., 300 pps 1.
PAGE 4
Individual Component Characteristics Symbol Parameter Test Conditions Device Min. Typ. Max. Unit 1.45 1.7 V EMITTER VF BVR Input Forward Voltage Input Reverse Breakdown Voltage ΔVF / ΔTA Temperature Coefficient of Forward Voltage IF = 16 mA, TA = 25°C All IF = 16 mA All IR = 10 µA All IF = 16 mA 1.8 5.0 21 V All -1.7 mV/°C IF = 0 mA, VO = VCC = 5.5 V, TA = 25°C All 0.0007 0.5 IF = 0 mA, VO = VCC = 15 V, TA = 25°C 6N135M 6N136M HCPL4503M 0.
PAGE 5
(Continued) TA = 0 to 70°C unless otherwise specified. Typical value is measured at TA = 25ºC and VCC = 5.0 V. Transfer Characteristics Symbol Parameter Test Conditions Device Min. Typ. Max. Unit 6N135M 7 38 50 % 19 38 50 % COUPLED CTR Current Transfer Ratio(5) IF = 16 mA, VO = 0.4 V, VCC = 4.5 V, TA = 25°C HCPL2530M 6N136M HCPL4503M HCPL2531M IF = 16 mA, VCC = 4.5 V VOL Logic LOW Output Voltage VOL = 0.4 V 6N135M VOL = 0.5 V HCPL2530M VOL = 0.4 V 6N136M HCPL4503M VOL = 0.
PAGE 6
(Continued) TA = 0 to 70°C unless otherwise specified. Typical values are measured at TA = 25°C and VCC = 5V. Switching Characteristics (VCC = 5V) Symbol Parameter tPHL Propagation Delay Time to Logic LOW Test Conditions Device Min. 6N135M TA = 25°C, RL = 4.1 kΩ, IF = 16 mA(6) (Figure 15) HCPL2530M RL = 1.9 kΩ, IF = 16 mA, TA = 25°C(7) (Figure 15) 6N136M HCPL4503M Typ. Max. Unit 0.23 1.5 µs 0.25 0.8 µs HCPL2531M tPLH Propagation Delay Time to Logic HIGH RL = 4.
PAGE 7
(Continued) TA = 0 to 70°C unless otherwise specified. Typical values are measured at TA = 25°C and VCC = 5 V. Isolation Characteristics Symbol Characteristics Test Conditions Min. 5,000 VISO Withstand Insulation Test Voltage RH ≤ 50%, TA = 25°C, II-O ≤ 10 µA, t = 1 minute, f = 50 Hz(9)(11) RI-O Resistance (Input to Output) VI-O = 500 VDC(9) CI-O Capacitance (Input to Output) f = 1 MHz, VI-O = 0V (9) 500 VDC(10) Typ. Max.
PAGE 8
CTR (NORMALIZED) CTR(TA) / CTR (TA = 16 mA) CTR (NORMALIZED) CTR(IF) / CTR (IF = 16 mA) For single-channel devices; 6N135M, 6N136M, and HCPL4503M. 1.6 1.4 1.2 1.0 0.8 0.6 VO = 0.4 V VCC = 5 V TA = 25°C Normalized to: IF = 16 mA 0.4 0.2 0.0 0.1 1 10 100 1.2 1.0 0.8 0.6 0.4 0.
PAGE 9
CTR (NORMALIZED) CTR(TA) / CTR (TA = 25°C) CTR (NORMALIZED) CTR(IF) / CTR (IF = 16 mA) For dual-channel devices; HCPL2530M and HCPL2531M. 1.6 1.4 1.2 1.0 0.8 0.6 VO = 0.4 V VCC = 5 V TA = 25°C Normalized to: IF = 16 mA 0.4 0.2 0.0 0.1 1 10 100 0.8 0.6 0.4 IF = 16 mA VCC = 4.5 V VO = 0.4 V Normalized to: TA = 25°C 0.2 0.0 -40 -20 0 20 40 60 80 100 TA - TEMPERATURE (°C) Figure 9. Normalized CTR vs. Forward Current Figure 10. Normalized CTR vs.
PAGE 10
Pulse Generator I F tr = 5ns Z O = 50 Ω 10% D.C. I/f < 100 μs 1 Noise Shield 8 + 2 7 VF - 3 6 VCC Pulse Generator tr = 5 ns Z O = 50 Ω +5 V VB 10% DUTY CYCLE I/f < 100 μS RL VO IF MONITOR 0.1 μF 4 5 1 8 VCC +5 V RL VF1 - 7 2 V01 VO C L = 15 pF 3 6 4 5 VF2 + Rm C L = 15 pF GND Noise Shield + - VO I F Monitor Rm IF V02 0.1 μF GND Test Circuit for HCPL2530M and HCPL2531M Test Circuit for 6N135M, 6N136M, and HCPL4503M IF 0 5V VO 1.5 V 1.
PAGE 11
Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M — High Speed Transistor Optocouplers Reflow Profile Temperature (°C) TP 260 240 TL 220 200 180 160 140 120 100 80 60 40 20 0 Maximum Ramp-up Rate = 3°C/S Maximum Ramp-down Rate = 6°C/S tP Tsmax tL Preheat Area Tsmin ts 120 240 360 Time 25°C to Peak Time (seconds) Profile Freature Pb-Free Assembly Profile Temperature Min. (Tsmin) 150°C Temperature Max.
PAGE 12
Part Number Package Packing Method 6N135M DIP 8-Pin Tube (50 units per tube) 6N135SM SMT 8-Pin (Lead Bend) Tube (50 units per tube) 6N135SDM SMT 8-Pin (Lead Bend) Tape and Reel (1,000 units per reel) 6N135VM DIP 8-Pin, DIN EN/IEC 60747-5-5 option Tube (50 units per tube) 6N135SVM SMT 8-Pin (Lead Bend), DIN EN/IEC 60747-5-5 option Tube (50 units per tube) 6N135SDVM SMT 8-Pin (Lead Bend), DIN EN/IEC 60747-5-5 option Tape and Reel (1,000 units per reel) 6N135TVM DIP 8-Pin, 0.
PAGE 13
Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M — High Speed Transistor Optocouplers Package Dimensions Figure 18. 8-Pin DIP Through Hole Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision.
PAGE 14
Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M — High Speed Transistor Optocouplers Package Dimensions (Continued) Figure 19. 8-Pin DIP Surface Mount (Option S) Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision.
PAGE 15
Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M — High Speed Transistor Optocouplers Package Dimensions (Continued) Figure 20. 8-Pin DIP Through Hole 0.4” Lead Spacing (Option T) Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision.
PAGE 16
Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M — High Speed Transistor Optocouplers Package Dimensions (Continued) Figure 21. 8-Pin DIP Surface Mount 0.4” Lead Spacing (Option TS) Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision.
PAGE 17
D0 P0 t K0 P2 E F A0 W1 d t P User Direction of Feed Symbol W W B0 Description D1 Dimension in mm Tape Width 16.0 ± 0.3 Tape Thickness 0.30 ± 0.05 P0 Sprocket Hole Pitch 4.0 ± 0.1 D0 Sprocket Hole Diameter 1.55 ± 0.05 E Sprocket Hole Location 1.75 ± 0.10 F Pocket Location 7.5 ± 0.1 2.0 ± 0.1 P2 P Pocket Pitch A0 Pocket Dimensions 12.0 ± 0.1 10.30 ±0.20 B0 10.30 ±0.20 K0 4.90 ±0.20 W1 d R ©2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXM Rev. 1.0.
PAGE 18
D0 P0 t K0 P2 E F A0 W1 d P User Direction of Feed Symbol W W B0 Description D1 Dimension in mm Tape Width 24.0 ± 0.3 Tape Thickness 0.40 ± 0.1 P0 Sprocket Hole Pitch 4.0 ± 0.1 D0 Sprocket Hole Diameter 1.55 ± 0.05 E Sprocket Hole Location 1.75 ± 0.10 F Pocket Location 11.5 ± 0.1 t 2.0 ± 0.1 P2 P Pocket Pitch A0 Pocket Dimensions 16.0 ± 0.1 12.80 ± 0.1 B0 10.35 ± 0.1 K0 5.7 ±0.1 W1 d R ©2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXM Rev. 1.0.
PAGE 19
Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M — High Speed Transistor Optocouplers 19 www.fairchildsemi.com ©2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXM Rev. 1.0.