User Manual

41
Journeyman Full Body Harnesses and Combinations – Rated 425 lbs.
7020 7023 7029 7034QCS 7035QCL
7020XL 7023XS 7029XL 7034QCM BV7034MP
70202X 7023XL 70292X 7034QCL BV7034LP
7021 70232X 70293X 7034QC2X3X BV7034XLP
7021XS 70233X 7029MB 7035XS BV7034XXP
7021XL 70234X 7029MBXL 7035S BV70343XP
7021XLSP 7023QC 7029QC 7035M GT70212X
70212XL 7024 7029QCXL2X 7035L GT70213X
70212X246Y 7025 7033 7035XL 7042
70212X46Y3 7025XL 7034S 7035XXL 7042S
70213X 70252X 7034M 70353XL 7042M
70214X 7027 7034L 70354XL 7042L
7021QC 70272X 7034XL 7035MQC 70422XL
7021QCXL 70273X 7034XX 7035XLQC
7021QC2X3X 7027QC 70343X 7035QCS
Specialty Full Body Harnesses – Rated 425 lbs.
7037 7039XL 7041XL 7047XL OI70373QC
7037XL 70392X 70412X 7048S
70372X 7040 7047S 7048M
70373QC 7041 7047M 7048L
7039 7041XS 7047L 7048XL
ComforTech Full Body Harnsses – Rated 425 lbs.
7080SM 7081SMRD 7082QSM 70832X 7085XL
7080LX 7081LXFD 7082QLX 7083QSM BM7080SM
70802X 7081LXRD 7082Q2X 7083QLX BM7080LX
70803X 7081LXFDRD 7082QSMFD 7083Q2X BM70802X
7080LXFD 70812XFD 7082QLXFD 7083Q3X BM7080SMRD
7081SM 70812XRD 7082Q2XFD 7084S BM7080LXRD
7081LX 7082SM 7082LXQSFD 7084M BM7080RDLX
7081XS 7082LX 70822XQSFD 7084L SH7041LX
70812X 70822X 70823XQSFD 7084XL
70813X 70823X 7082SMQSFD 7085S
70814X 7082SMRD 7083SM 7085M
7081SMFD 7082LXFD 7083LX 7085L
FlowTech Full Body Harnesses – Rated 425 lbs.
7086S 7087L 7088S 7089L
7091SFD
7086M 7087XL 7088M 7089XL
7091MFD
7086L 7087SFD 7088L 7089SFD
7091LFD
7086XL 7087MFD 7088XL 7089MFD
7091XLFD
7087S 7087LFD 7089S 7089LFD
7087M 7087XLFD 7089M 7089XLFD
42
High-Vis Vests with Full Body Harnesses
7018SMO 7015SMO 7015LXL 7018LXL
7018LXO 70152X3XO 70152X3XL 70182X3XL
70182X3XO 7015SML 7018SML
Titanium™ Full Body Harnesses
7006T 7008T 7010T 7078SMT 7078SMST
7006ST 7008ST 7010ST 7078LXT 7078LXST
ARC Flash Full Body Harnesses
7047 70472X 7049XL 7051S
7047S 7049 70492X 7051XL
7047XL 7049S 7051 70512X
Appenix A: Tower Climbing Harnesses
With the rapid expansion of communications technology and wind
energy, climbing and prolonged work positioning at extreme heights is
becoming more common. FallTech has introduced a series of Tower
Harnesses under the ComforTech line to address this need.
Harnesses for these specialized applications typically require
additional knowledge and training. Before using this product, be sure
you have read and understand the contents of this entire instruction
manual and that you have undergone training for the use of this product
in accordance with ANSI Z359.2-2007 and Section 6 of this instruction
manual. Lack of training in the use of this product and subsequent
misuse may lead to serious injury or death.
FallTech 7084 series and 7085 series Tower Harnesses are equipped
with a seat sling for prolonged work positioning. Before using, check for
proper installation of the seat sling:
1. On the back of the seat sling are two narrow web straps which
fasten to the waist pad by means of 1” pass-thru buckles.
Ensure these are fastened and adjusted to your preference.
These straps are not load-bearing: They are to position the seat
sling relative to your backside so that it is in the correct position
prior to engagement.
2. Adjacent to each D-ring, you will find a black 1-3/4” web strap
with a male pass-thru buckle. This buckle is attached to the
steel buckle on either side of the waist pad, located behind the
side or hip D-rings. Ensure this buckle and strap assembly is
inserted in the manner shown in Figure A below.