Use and Care Manual
Technical
Data Sheet
FAMOWOOD GLAZE COAT
HIGH BUILD EPOXY COATING
FAMOWOOD GLAZE COAT|USA/CAN/MEX/AU/NZ|Rev 17 – Effective:12.30.19 Approved: TMorgan(12/30/19)/MStark (6.13.19) /EDavis (2/15/19) Page | 1
Eclectic Products LLC
Manufacturing Facility
101 Dixie Mae Drive
Pineville, Louisiana
eclecticproducts.com
Customer Service
1-800-349-4667
Technical Support
1-800-767-4667
Administration Office
Eugene, Oregon
1-800-693-4667
ISO 9001:2015
Compliant
Quality Management Systems
UNITED STATES/
MEXICO
Pint Kit
Quart Kit
Gallon Kit
Not all styles/sizes/colors available in
all areas.
PRODUCT DESCRIPTION
FAMOWOOD GLAZE COAT HIGH BUILD EPOXY COATING is an ultra-clear epoxy that
dries to a high gloss finish. It’s versatile enough for use on almost any surface – smooth
or rough, stained or painted, old or new. This easy-to-use, 1:1 ratio is ideal for
household and craft projects - just one pour equals 70 coats of varnish.
WHERE TO USE / APPLICATIONS
This ultra-clear, high gloss finishing epoxy is ideal for home improvement and craft
projects.
- coat tables, clocks, game boards and furniture
- imbed coins, rocks, sea shells, flowers or any non-waxy material
- preserve pictures, photographs, posters, signs and ceramics
FEATURES AND BENEFITS
HIGH BUILD EPOXY – Just one pour equals 70 coats of varnish
EASY TO USE – Easy 1:1 mixing ratio (by volume)
VERSATILE
– May be used on any non-waxy material.
SELF-LEVELING – Minimal spreading and maintenance required
TECHNICAL INFORMATION
PROPERTIES
Natural color:
Clear
Tensile strength:
450 psi
Tear strength:
200 psi
Shear strength:
200 psi
Compressive strength:
800 psi
Compressive strain:
75%
Elongation:
15%
Shore hardness:
85D
Solids content:
100%
VOC:
7.7 g/l as mixed
Viscosity (Side A Resin):
>1,450
Viscosity (Side B Hardener):
850-1,150
Viscosity (Mixed):
1,100
Mixing ratio:
1 to 1 by volume
Pot life (working time):
30 minutes @ 70 °F / 21 °C
Tack free time:
12 hours @ 70 °F / 21 °C
Cure time:
72 hours (depending on temperature)
Weight/gallon:
Part A (Resin): 9.63 / Part B (Hardener): 7.93 @ 77 °F /
25 °C (ASTM D-1475)
Application temperature:
70 to 80 °F (21 to 27 °C)
Service temperature:
10 to 120 °F (-12 to 49 °C)
Storage temperature:
Do not store above 95 °F (35 °C); if materials are hot
bring them to room temperature (77 °F / 25 °C) before
mixing.
Food Safety:
Glaze Coat is not classified as “Food Grade” or “Food
Safe” for direct food serving or storage by the FDA.
Properly cured Glaze Coat surfaces are safe to serve and
store food on so long as the food is contained in or on a
plate/container intended for direct food use. Heating,
serving, and storage of food directly on a Glaze Coat
surface is not recommended.