FANAWAY MERIDIAN CEILING FAN • • • • INSTALLATION OPERATION MAINTENANCE WARRANTY INFORMATION CAUTION READ INSTRUCTIONS CAREFULLY FOR SAFE INSTALLATION AND FAN OPERATION. For customer support, please contact: Tel: +1 (949) 800 8488 Email: support@beaconlighting.us US Patent 8317470, 8807938, 8790085, 9255584, 8851841 www.beaconlighting.us. V1.
Fanaway Meridian Installation Instructions THANK YOU FOR PURCHASING Thank you for purchasing this quality Fanaway product. To ensure correct function and safety, please read and follow all instructions before assembly, installation and use of this ceiling fan. Please keep instructions for future reference. SAFETY PRECAUTIONS Read and Save These Instructions This product conforms to UL standard 507. 1.
Fanaway Meridian Installation Instructions PARTS LIST • Unpack your ceiling fan and carefully. Remove all parts and hardware. • Lay out all the components on a smooth surface and make sure there are no components missing before assembling. If parts are missing, return the complete product to the place of purchase for inspection or replacement. • Check whether the ceiling fan has been damaged during transport. Do not operate/install any product which appears damaged in any way.
Fanaway Meridian Installation Instructions • Wood screw x 2 Canopy x 1 • Machine screw x 2 3 Down rod with ball joint x 1 • Flat washer 4 Bolt and pin cover x 1 • Spring washer x 2 5 Bolt x 1 10 Wire nut x 6 6 Pin x 1 11 Receiver & Remote x 1 Set 7 Fan assembly x 1 12 LED bulb x 3 8 Lamp base and shade x 1 1 Mounting bracket x 1 2 9 x2 INSTALLING THE MOUNTING BRACKET If there isn’t an existing outlet box, then install one using the following instructions: • Disconnect the p
Fanaway Meridian Installation Instructions To hang your fan where there is an existing fixture but no ceiling joist, you may need an installation hanger bar (C) as shown in Fig.5. Make sure the hanger bar you purchase has been designed for use with ceiling fans. Fig. 5 INSTALLING THE FAN INSTALLING THE DOWN ROD (Fig. 6) 1. Feed the down rod (5) through the canopy (4) and the bolt and pin cover (6). 2.
Fanaway Meridian Installation Instructions FAN INSTALLATION LIGHT KIT INSTALLATION (Fig.7 & 8) 1. Loosen the screw (1) from the fan bracket. Align the two slot screws with the keyhole slots (2) of the light kit bracket. (Fig. 7) 2. Turn the light kit counterclockwise until the slot screws are firmly at the end of the slots (2). 3. Secure screw (1) to the lamp shade bracket. Tighten all three screws. Do not over-tighten. Fig. 7 4. Connect the quick connector to the lamp holder part (3). (Fig. 8) 5.
Fanaway Meridian Installation Instructions HANGING THE FAN Pass the power supply wires (C) from the ceiling outlet box (B) through the center of the ceiling mounting bracket (D). Install the ceiling mounting bracket (D) on the outlet box (B) with the mounting screws (F) provided with the outlet box and washers (E) provided with fan. Fig. 9 Fig. 9 Lift the fan assembly onto the mounting bracket.
Fanaway Meridian Installation Instructions ELECTRICAL WIRING DIAGRAM WARNING: To avoid possible electrical shock, be sure you have turned off the power at the main circuit panel. Follow the steps below to connect the fan to your household wiring. Use the wire connecting nuts supplied with your fan. Secure the connectors with electrical tape. Make sure there are no loose wire strands or connections. 1. Connect the household live supply wire (black) to receiver input wire (black, AC IN L) as shown in Fig.
Fanaway Meridian Installation Instructions FINISHING THE INSTALLATION Slide and align the canopy up to the mounting bracket. Ensure all electrical wiring is tucked inside the canopy and that the wires are not damaged during this step. Secure the canopy to the hanger bracket using the screws provided. Fig.
Fanaway Meridian Installation Instructions INSTALLING THE REMOTE BATTERY 1 x 9V DC (size) battery is required to operate the remote control. Remove the battery cover from the back of the remote and 1 x 9V DC (size) battery. Ensure the polarities are correct as shown on the battery connector. (Batteries included.) OPERATING THE REMOTE: Before you start using the remote, take the time to read through this section and get familiar with the buttons and function of each button.
Fanaway Meridian Installation Instructions AFTER INSTALLATION WOBBLE: NOTE: ceiling fans tend to move during operation due to the fact that they are mounted on a rubber grommet. If the fan was mounted rigidly to the ceiling it would cause excessive vibration. Movement of a few centimetres is quite acceptable and DOES NOT suggest any problem. TO REDUCE THE FAN WOBBLE: Please check that all screws which fix the mounting bracket and down rod are secure.
Fanaway Meridian Installation Instructions GRACIAS POR SU COMPRA Gracias por adquirir este producto Fanaway de calidad. Para garantizar el correcto funcionamiento y la seguridad de este ventilador de techo, antes de armarlo, instalarlo y usarlo lea y siga todas las instrucciones. Conserve estas instrucciones para consultas en el futuro. MEDIDAS DE SEGURIDAD Lea y conserve estas instrucciones Este producto está conforme con el estándar UL 507. 1.
Fanaway Meridian Installation Instructions LISTA DE PIEZAS • Desempaque el ventilador con cuidado. Saque todas las piezas y la tornillería. • Deposite todos los componentes sobre una superficie lisa y verifique que no falta ninguno antes de iniciar el armado. Si falta alguna pieza, regrese el producto completo al lugar donde lo adquirió para que lo examinen o reemplacen. • Compruebe si el ventilador de techo se dañó durante el transporte.
Fanaway Meridian Installation Instructions • 2 tornillos para madera 1 florón • 2 tornillos de máquina 3 1 tija con junta de bola • 2 arandelas planas 4 1 cubierta de perno y clavija • 2 arandelas de resorte 5 1 perno 10 6 tuercas para cable 6 1 clavija 11 1 juego de receptor y control remoto 7 1 conjunto de ventilador 12 3 lámparas LED 8 1 pantalla y base de lámpara 1 1 soporte de armado 2 9 INSTALACIÓN DEL SOPORTE DE ARMADO Si no hay ya una caja de salida, instale una sigui
Fanaway Meridian Installation Instructions Para colgar el ventilador donde ya existe una luminaria pero no hay una viga de techo, es posible que necesite instalar una barra de colgado (C) como se ilustra en la Fig. 5. Asegúrese de que la barra de colgado que compra se ha diseñado para utilizarse con ventiladores de techo. Fig. 5 INSTALACIÓN DEL VENTILADOR INSTALACIÓN DE LA TIJA (Fig. 6) 1. Introduzca la tija (5) en el florón (4) y el perno y la cubierta de la clavija (6). 2.
Fanaway Meridian Installation Instructions INSTALACIÓN DEL VENTILADOR INSTALACIÓN DEL KIT DE ILUMINACIÓN (Fig. 7 y 8) 1. Afloje el tornillo (1) del soporte del ventilador. Ponga en línea las dos ranuras de los tornillos con las ranuras del bocallave (2) del kit de iluminación. (Fig. 7) 2. Gire el kit de iluminación en sentido antihorario hasta que las ranuras de los tornillos queden firmes en el extremo de las ranuras (2). 3. Fije el tornillo (1) al soporte de la pantalla de la lámpara.
Fanaway Meridian Installation Instructions CÓMO COLGAR EL VENTILADOR Pase los cables de alimentación eléctrica (C) de la caja de salida del techo (B) a través del centro del soporte de armado en el techo (D). Instale el soporte de armado en el techo (D) en la caja de salida (B) con los tornillos de armado (F) suministrados con la caja de salida y las arandelas (E) incluidas con el ventilador. Fig. 9 Fig. 9 Eleve el conjunto del ventilador sobre el soporte de armado.
Fanaway Meridian Installation Instructions DIAGRAMA DE CABLEADO ELÉCTRICO ADVERTENCIA: Para evitar cualquier posible descarga eléctrica, asegúrese de haber desconectado la alimentación eléctrica en el panel de circuito general. Siga los pasos que aparecen a continuación para conectar el ventilador al cableado de su casa. Use los protectores de conexión de cable que se suministran con su ventilador. Fije los conectores con cinta eléctrica. Asegúrese de que no haya hilos de cables sueltos o conexiones flojas.
Fanaway Meridian Installation Instructions CÓMO FINALIZAR LA INSTALACIÓN Deslice y ponga en línea el florón en el soporte de armado. Verifique que todo el cableado eléctrico está introducido en el florón y que los cables no se han dañado al hacerlo. Fije el florón al soporte de colgado con los tornillos suministrados. Fig.
Fanaway Meridian Installation Instructions INSTALACIÓN DE LA BATERÍA DEL CONTROL REMOTO El control remoto funciona con 1 batería de 9V DC. Retire la tapa de la batería ubicada en la parte posterior del control remoto e inserte 1 batería de 9V DC. Compruebe que las polaridades están en dirección correcta como se indica en el conector de la batería.
Fanaway Meridian Installation Instructions DESPUÉS DE LA INSTALACIÓN BAMBOLEO: NOTA: Los ventiladores de techo tienden a moverse cuando están en funcionamiento debido a que están armados sobre una arandela de caucho. Si el ventilador se montó en el techo de forma rígida, esto podría causar una vibración excesiva. Un movimiento de unos centímetros es aceptable y NO indica problema alguno.
Fanaway Meridian Installation Instructions INFORMACIÓN TÉCNICA Dimension Velocida Voltios Amper Vatios es del d (V) ios (W) ventilador BI-48" VENTILADO RPM ft³/min ft³/min/ Peso Peso W neto bruto (lb) (lb) (A) ft³ Extra alta 120 0,47 56,36W 207 4172,69 74,03 25,36 29,76 5,05 Media alta 120 0,36 32,59W 160 3029,29 92,95 25,36 29,76 5,05 Baja 120 0,27 19,37W 119 2115,13 109,19 25,36 29,76 5,05 R-MExxx-U SA-FA Estas medidas son aproximadas.