Installation Guide

11
Figure 4
3. Connect wires using connectors as shown in
Figure 4.
x 8
WIRE
CONNECTORS
RECEIVER HARDWARE USED:
CAUTION: INCORRECT WIRE CONNECTION
COULD DAMAGE THIS RECEIVER.
How to Wire Your Ceiling Fan (continued)
Listed
Outlet Box
White Wire
from Supply
Green Wire
from Supply
(Ground)
Household
Supply
Black Wire
from Supply
Black Wire
from Receiver
White Wire
from Receiver
Green Wire
from Hanger
Bracket (Ground)
Green Wire
from Hanger
Ball (Ground)
Green Wire
from Receiver (2)
(Ground)
Receiver
Figure 5
Listed
Outlet Box
RED
BLACK
WHITE
BLK-ANT
GRAY
YELLOW
GREEN-Ground Wire
From Hanger Bracket
GREEN-
Ground wire
From Ceiling
GREEN-Ground Wire
From Hanger Ball
GREEN / YELLOW
- Ground wire (2)
From Receiver
BLUE
4. After connections have been made, put the white and green leads to one side and the black leads
towards the other side, the connection should be turned upward and carefully push leads into the outlet box.
The wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one
side of the outlet box and the ungrounded conductor on the other side. (Figure 5)
WARNING
The blades must be installed first before programming
is performed.
WARNING
Check to see that all connections are tight,
including ground, and that no bare wire is
visible at the wire connectors. Do not operate
fan until the blades are in place. Noise and
motor damage could result.
BLUE
BROWN
BROWN
BLACK
WHITE
L
N
AC POWER
BLUE
LIGHT KIT
YELLOW
/ GREEN
GROUND
HANGER
BRACKET
HANGER
BALL
DC MOTOR
BLACK
ANTENNA
Receiver
BLACK WHITE BLUE BROWN
RED GRAY YELLOW
RED
GRAY
YELLOW
WHITE