Installation Guide

How to Operate Your Ceiling Fan (Continued)
• Home Away: Tap this button, the light will blink
twice signaling this feature is on; the fan will turn off
and the light will randomly turn on and off while you
are away. Pressing any button will cancel the feature.
• Fresh Air: Fan speed will modulate to simulate
a natural breeze.
• Safe Exit: Tap once, the light will blink once; fan
and light will turn off after 1 minute. Pressing any
button will cancel this feature.
• Reverse button:
In order to reverse the direction of the fan, the fan
must be running.
Summer- The fan runs counterclockwise. Airflow
will provide a downward cooling breeze.
Winter- The fan runs clockwise. Airflow will force
warm air downward without a noticeable breeze.
16
1. Installing Wall Holder: (Figure 1)
Attach wall plate using the two provided screws.
Periodic cleaning of your new ceiling fan is the only
maintenance necessary.
When cleaning, use only a soft brush or lint free cloth to
avoid scratching the finish.
Abrasive cleaning agents are not required and should be
avoided to prevent damage to finish.
Periodic light dusting of the blades is recommended.
A feather duster will work best.
Avoid using water, cleansers, or harsh rags, which
can warp and ruin the blades.
CAUTION
Do not use solvents when cleaning your ceiling fan. It
could damage the motor or the blades and create the
possibility of electrical shock.
Figure 1
How to Install Your Remote Control
How to Clean Your Ceiling Fan Blades
Maintenance
Screws (2)
Wall Holder