Instruction Manual

8
7. Quick Menu- Pushing this control activates the camera quick menu button. When the quick menu
control is pushed down, a quick menu is displayed for the function that is selected by the Quick
Menu Dial.
8. Quick Menu Dial- Turning this dial swivels the camera quick menu dial.
a. In order for the housing quick menu dial to indicate the proper menu selected by the camera
quick menu dial, it is best to align housing and camera quick menu dials prior to installing the
camera inside the housing. Please refer to the section “Installing the Camera” for further
information.
b. When housing and camera quick menu dials are aligned, the menu displayed on the right
side of the housing quick menu dial is the one selected.
c. Note: Housing and camera quick menu dials may not remain aligned during your dive.
Therefore, it is important to check the menu selected and displayed on the camera LCD
screen when switching menus. Even in such cases, since menu labels on the housing quick
menu dial appear according to their order on the camera quick menu dial, they can still assist
with planning the number of swivels required in order to reach the desirable menu.
d. In order to switch menus, turn the housing quick menu dial.
e. Note that since the rotary wheel cannot be manipulated in order to set the various menu
items, the command dial, sub-command dial and multi-selector buttons should be used for
navigating through the menus and making selections.
9. Cold-Shoe Mount for Lighting Accessories- Enables mounting a flash, night dive torch or focus light
on top of the housing by using a dedicated connector. For further information regarding such
connectors, please visit the Fantasea website – www.fantasea.com
10. Fiber Optic Cable Plate-
a. When installed on the housing, the fiber optic cable plate and the two adaptors inserted
inside it allow for an easy attachment of 2 fiber optic cables to the housing. For further
instructions, please refer to the section “External Flashes”.
b. Remove the fiber optic cable plate from the housing in order to make use of the internal
camera flash during your dive. In order to remove the plate, insert your fingers beneath the
adaptors installed inside the plate and pull the plate upwards till it is removed from its slot.
c. Make sure the fiber optic cable plate is secured to the housing by its secure line in order to
avoid losing it during the dive.