Computer Hardware User Manual

1 V7865 Product Manual

Front Panel

Connectors

The V7865 provides front-panel access to the PMC expansion site, the VGA connector,

the two GbE connectors, the manual reset switch, COM1 port, two USB ports, the

Mouse/Keyboard, and the status LEDs. A drawing of the V7865 front panel is shown

in Figure 1-5 on page 37. The front panel connectors and indicators are labeled as

follows:

• LAN1 GbE connector

• LAN2 GbE connector

• VGA VGA video connector

•RST Manual reset switch

• COM1 COM port

• M/K Combination mouse/keyboard connector

• USB USB connectors

• BPHT Status LEDs

The V7865 provides rear I/O support for VME with 2eSST 320MB/s, the optional

PMC I/O (Vita 35), DVI-D, two USB 2.0 ports, COM2 (RS232/RS422), and two SATA

drives. These signals are accessed by the use of a rear transition module (RTM) such

as the ACC-0602RC or the ACC-0603RC, which terminate the signals into industry

standard connectors. The front panel connectors, including connector pinouts and

orientation, for the V7865 are defined in Appendix A "Connector Pinouts".

NOTE: RTMs may not support all available V7865 rear I/O mentioned above. RTM

connections are defined in the appropiate RTM Installation Guide. See the V7865

product specification for compatible RTMs offered by GE Fanuc Embedded Systems.

LEDs

See Figure 1-5 on page 37 for a diagram of the Rugged Front Panel option. Beside the

diagram are the definitions of the various LEDs on the front panel. The connections

and the LEDs are the same for the Standard Front Panel option, which is shown in

Figure 1-6 on page 39.