Use and Care Manual

18
16. INQUIRING FUNCTION
1. If the clock has been set, in cooking state, press “CLOCK ", the clock will display for three seconds
2. In the microwave cooking state, press “POWER” to inquire microwave power level then the
current microwave power will be displayed.
17. LOCK FUNCTION FOR CHILDREN
Lock: In waiting state, press “STOP/CANCEL" for 3 seconds, there will be a long "beep" denoting the
entering into the children-lock state; The screen will display "LOCKED", If the clock has been set, "L" and
current time will display after 2 seconds.
Unlock: In locked state, press “STOP/CANCEL” for 3 seconds, there will be a long "beep" denoting that
lock is released. The screen will display the current time or "0:00".
19. COOKING END REMINDING FUNCTION
When the cooking is over, the buzzer will ring 5 times and "FINISH" will flash in the screen to remind
user the cooking is finished. In order to make the appliance into the waiting state, please press "STOP /
CANCEL" or open the door .
OTHER SPECIFICATIONS
1. " START/+30SEC." must be pressed to continue cooking if the door is opened during
cooking
2. The buzzer sounds once with proper press, improper press will have
no response.
18. ENERGY SAVER MODE
In standby mode, press STOP/Cancel once (less than 3 seconds to avoid starting the child lock
function) to enter the Energy Saver Mode.
In child-locked mode, press STOP/Cancel once (less than 3 seconds) and release to enter the
Energy Saver Mode.
1.
2.
3.
4.
Above operation is the only way to start the Energy Saver mode.
The Energy Saver mode works only if the fdoor is closed.
20.