- FARGO Electronics All in One Printer User Manual

RESTRICTED USE ONLY Fargo Electronics, Inc.

HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3)

11-24

Adjusting the Flipper Offset

Step Procedure

1 Select MENU, Setup Printer and Flipper Offset.

Change the setting in small increments if the card is not feeding correctly. (Note:

A negative adjustment will lower the side of the Flipper Table closest to the Input

Hopper.)

There are five (5) settings under the Flipper Settings Menu:

 Mag/Prox

 Level

 Smart

 Inverted

 Home

See the Menu Tree in this section for their use. All settings can be tested from

this Menu.

Press the Save button to save the value.