- Faria Corp Automobile Parts User Manual

will flash on the LCD next to the “S” and
the audible alarm will sound rapidly.
When the deep depth setting is read by the
depth sounder, the Function Indicator will
flash on the LCD next to the “D” and the
audible alarm will sound at 2 beeps per
second.
NOTE: Once a keel offset is
programmed, the depth below the keel
will activate the shallow and deep
alarms.
NOTE: To fully deactivate an alarm,
reset it to zero.
Setting the Shallow Alarm:
Press and hold the “MODE” button until
the Pilot beeps to select the Edit Mode.
Continue pressing the “MODE” button
quickly until the Function Indicator points
to the “S” indicating the shallow depth
alarm setting. This is the shallowest water
that will activate the alarm.
Press and hold the “Up” or “Down” arrow
keypads to adjust the reading to the
desired depth.
Setting the Deep Alarm:
Press and hold the “MODE” button until
the Pilot beeps to select the Edit Mode.
Continue pressing the “MODE” button
quickly until the Function Indicator points
to the “D” indicating the deep depth alarm
setting.
This is the deepest water that will activate
the alarm. Press and hold the “Up” or
“Down” arrow keypads to adjust the
reading to the desired depth.
Setting the Keel Offset:
Keel Offset can be set so that the depth
sounder either shows the depth below the
keel, (set the offset to be the depth
between the transducer and the bottom of
the keel) or the depth below the transducer
(set the offset to 0).
For example, if the bottom of the keel is 2
ft. below the transducer and you want the
depth sounder to read the depth below the
keel, the display should be adjusted to
read minus -2.0.
S
KL
D
F
FA
M
S
KL
D
F
FA
M
Page 6