Specifications

Richardson Electronics
GmbH
Raiffeisenstr. 5
78166 Donaueschingen
Germany
www.canvys.com
Rev. AC
Seite 5 von 11
- : decrease the brightness and the values in OSD menu,
and navigates through OSD menu upwards
POWER: Display On/Off
OSD is locked as default. “Menu” and “+” for 3 sec = lock
; “menu” and “source” for 3 sec = unlock. FW = V1.3.
Mounting type
VESA100 with M4 threads
Stand
not included
IP Protection
IP65 (front); IP42 (whole unit, w/o interfaces). No silicone
glue at backcase allowed. The unit need to be able for
opening in service case. IP protection will be guaranteed
over cellular rubber and 3M L-shape seal inside of
housing.
Passepartout Color and glas print
Black (RAL 9005), with RFID and Intravis Logo print.
Intravis logo in white RAL 9016 and yellow RAL 1021.
RFID in RAL 9016.
Status LED
LED on frontglass, bottom right side (round cut-out)
Mounting Holes for chassis/frame mounting
16 x mounting holes M3 on backside (usage e.g. with
clamp holders OP-CLAMPHLDR-HP).
Audio / Video I/O / Connectivity:
Video
VGA+HDMI+DP. DP is set as default input.
Else
M5 PE-Bolt (Only connection to housing, no grounding)
Audio
No loudspeaker, no audio input
USB HUB
1x USB-B up; 2x USB-A down
AD board
RTD2556T
RFID
CN370-2 RFID reader below mid frontglass with
ISO14443A/B,Mifare,DESFire EV1,Mifare
Plus,ISO/IEC18092 NFC;Win 10(64 bit)/8/7 support.
SDK provided.
Power supply
External Power Supply
Delivery without Power Supply
Input Voltage
9-36 V DC-in
Connector
4 Pin Connector (MPC-4-02)
Pin 1 = 9-36V
Pin 2 = 9-36V
Pin 3 = GND
Pin 4 = GND
This pinning is a must and needs to
be adapted accordingly for MP as
sample unit was wrong.