Instruction Manual


2.4 Axis Unit
{
200~230 VAC, 3-Phase, 50/60 HzAXIS UNIT INPUT POWER
100A70A70A50A50A50AAXIS UNIT IN-RUSH CURRENT
4A2A2A1A.625A .625A AXIS UNIT PEAK CURRENT
400W200W200W100W70W60WTOOL MOTOR RATING
MFA040
HA1NS
BXE020-
A912
MFA020
HA2NSA
MFA010
HA2NSA
BNE006-
A117
MFA006
HA2NSA
TOOL MOTOR MODEL
NUMBER
M4
W3M3M2W1M1TOOL MOTOR TYPE
AXIS-110AXIS-105AXIS-103AXIS UNIT TYPE
{ CPU: V25 - NEC @ 16 bits
{ Data communications: 1 RS422 communications port configurable for User Console
communications or raw data output
Example: Tool (nutrunner) model DFT-401M2
-S has an M2 motor type, and must be used
with a Type 203 Axis Unit.
NOTE: The M1 and W1 motors are functionally identical units, and can be interchanged
without any special considerations. The same is true of the M3 and W3 motors.
CAUTION: If the equipment is powered on and off repeatedly, the circuit breakers might
trip due to the in-rush current.
Chapter 2: Specifications (Rev. 8/98)
Page 2-5