Installation Sheet

IMPORTANT

TURN OFF THE POWER AT THE MAIN FUSE

OR CIRCUIT BREAKER BOX BEFORE

STARTING INSTALLATION

Carefully unpack and identify all parts before assembly.

Bulbs not included.

1. Slip fixture loop down through the fixture wires, and

then screw on top of fixture.

2. Follow enclosed supplement installation instructions

for electrical and fixture installation onto house outlet

box. If you do not have an outlet box at desired

location to attach the fixture then hire a qualified

electrician to create one.

3. A. Install stem onto bottom of fixture.

B. Install candle tube by slipping through sockets.

C. Install candle tube cap onto the top of the candle

tube.

D. Install type-B, candelabra base, of 60 Watt maximum

bulbs (not included).

4. Install the large ring onto the bottom of the fixture

with ball cap screws.

5. Install the small ring onto the center of the fixture with

cap nut screws.

6. Hang all crystal glass parts as shown on drawing.

NOTE: To replace broken crystal or pin, extras are

included in hardware bag. Replace by gently bending

open pin, remove broken crystal or pin, hook new one,

then close back pin. Avoid bending pin into sharp

angle.

Assembly Instructions For

F2661/8+4

(E) 12/10

A B C B C

B C B

8 Sets