Installation Sheet

1
Installation Instructions for
Feed the fixture wires through the hex nut and stem, then screw the stem to the top of the fixture.
Feed the fixture wires through the washer and fixture loop, then screw the fixture loop onto the stem.
Install the candle tubes by slipping them over the sockets.
Install the candle followers to the top of the candle tubes.
Screw the lamps into the sockets. Refer to the label on the lamp socket for Max Wattage information.
For Model F3131/9 Only: SkipInstall the cover to the bottom of the fixture and secure it in place using the desired finial.
to step 8.
Screw the desired finial to the bottom of the fixture.
Follow enclosed supplement installation instructions for electrical and fixture installation onto junction box.
1
2
1A
Annie Chandelier
1.0
F3130-6-F3131-9
F3130/6, F3131/9
8
3
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing NEC compliant junction
boxes.
This product is safety listed for damp locations.
Incandescent lamps may be dimmed with a standard incandescent dimmer.
LED LEDlamps may be dimmed with a dimmer. Consult lamp manufacturer for
additional information.
CAUTION RISK OF FIRE-
This product must be installed in accordance with the
applicable installation code by a person familiar with the
construction and operation of the product and the hazards
involved.
Use minimum 90°c supply conductors.
4
CUP (Model F3131/9)
SOCKET
5
FINIAL
CANDLE TUBE
CANDLE FOLLOWER
3
HEX NUT
STEM
FIXTURE LOOP
WASHER
2
1
6
4
LAMP
5
6
7
8
7
7
Chandelier