Installation Sheet

1
Installation Instructions for
Feed the fixture wires through the washer and upper frame, then screw the upper frame onto the socket assembly.
Install the lower frame to the side frames using the long screws, then secure the side frames to the upper frame using the short
screws. Install the caps over the screws.
Install the candle followers to the top of the candle tubes.
Screw the lamps into the sockets. Refer to the label on the lamp socket for Max Wattage information.
Follow enclosed supplement installation instructions for electrical and fixture installation onto junction box.
1
2
1A
Conant Chandelier
1.0
F3149-4-F3150-4-F3151-4
F3149-4-F3150-4-F3151-4
3
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing NEC compliant junction
boxes.
This product is safety listed for damp locations.
Incandescent lamps may be dimmed with a standard incandescent dimmer.
LED LEDlamps may be dimmed with a dimmer. Consult lamp manufacturer for
additional information.
CAUTION RISK OF FIRE-
This product must be installed in accordance with the
applicable installation code by a person familiar with the
construction and operation of the product and the hazards
involved.
Use minimum 90°c supply conductors.
4
5
Chandelier
5
4
CANDLE TUBE
CANDLE FOLLOWER
SIDE FRAME
3
LAMP
1
LONG SCREW
LOWER FRAME
CAP
SHORT SCREW
UPPER FRAME
SOCKET ASSEMBLYWASHER
22
22
STEM ASSEMBLY