Installation Guide

ManualsBrandsFeiss ManualsBathroom LightingMarteau 1-Light Oil Rubbed Bronze Wall Bath Light

Installation Instructions for

Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.

Screw the lamp into the socket. Refer to the label on the socket for Max Wattage information.

Install the shade to the fixture base and secure it using the washers and cap screws.

Marteau 1 Light Wall

1.0

W 1782B

Wall

GP I :ENERAL RODUCT NFORMATION

These fixtures are intended to be installed utilizing compliantNEC

junction boxes.

This product is safety listed for damp locations.

CAUTION RISK OF FIRE-

This product must be installed in accordance with the

applicable installation code by a person familiar with the

construction and operation of the product and the hazards

involved.

Use minimum 90°c supply conductors.

CAP SCREW

WASHER

LAMP

FIXTURE

BASE

Summary of content (4 pages)

PAGE 1
Installation Instructions for WB1782 Marteau 1 Light Wall WB1782 Wall GENERAL PRODUCT INFORMATION: CAUTION - RISK OF FIRE This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. These fixtures are intended to be installed utilizing NEC compliant junction boxes. This product is safety listed for damp locations. Use minimum 90°c supply conductors.
PAGE 2
MISE EN GARDE - RISQUE D'INCENDIE Ce produit doit être installé selon le code d’installation pertinent , par une personne qui connaÎt bien le produit et son fonctionnement ainsi que les risques inhérents Les fils d’alimentation doivent convenir pour 90°c. 1A BASE DE LUMINAIRE AMPOULE 2 1 RONDELLE 3 VIS CAPUCHON 1 Suivez les instructions d'installation de suppléments fermés pour l'installation électrique et appareil sur une boîte de sortie de la maison. 2 Visser l’ampoule dans la douille.
PAGE 3
ADVERTENCIA - RIESGO DE INCENDIO Este productor debe ser instalado segun el codigo de instalacion aplicable por una persona que conozca la constussion y el funcionamiento del producto y los riesgos que supone. Conductores de alimentacion 90°c Min. 1A BASE DE LÁMPARA BOMBILLA 2 1 ARANDELA 3 TORNILLO CAPUCHON 1 Siga las instrucciones de instalación de suplementos cerrados para la instalación eléctrica y el accesorio sobre la caja de salida de casa. 2 Atornille la bombilla en el enchufe.
PAGE 4
SAVE THESE INSTRUCTIONS! 7400 Linder Ave, Skokie, IL 160077 800.969.3347 www.Feiss.com © 2016 Feiss.All rights reserved.The "Feiss" graphic is a registered trademark of Feiss. Feiss reserves the right to change specifications for product improvements without notification.