Installation Guide

ManualsBrandsFeiss ManualsLightingTeva 1-Light Antique Bronze Wall Sconce

Installation Instructions for

Install the short finial to the top of the fixture and long finial to the bottom of the fixture using the finial screws.

Follow enclosed supplement installation instructions for electrical and fixture installation onto junction box.

Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.

Install the diffuser over the socket with notch in the orientation shown.

Install the shade to the top of the fixture and secure it in place using the cap screws.

Teva Wall

1.0

W 1860B

Wall

CAUTION RISK OF FIRE-

This product must be installed in accordance with the

applicable installation code by a person familiar with the

construction and operation of the product and the hazards

involved.

Use minimum 90°c supply conductors.

GP I :ENERAL RODUCT NFORMATION

These fixtures are intended to be installed utilizing compliant junctionNEC

boxes.

This product is safety listed for damp locations.

Incandescent lamps may be dimmed with a standard incandescent dimmer.

LED LEDlamps may be dimmed with a dimmer. Consult lamp manufacturer for

additional information.

This instruction shows a typical installation.

SHORT FINIAL

SHADE

LAMP

SOCKET

CAP SCREW

LONG FINIAL

FINIAL SCREW

DIFFUSER

NOTCH

Summary of content (4 pages)

PAGE 1
Installation Instructions for WB1860 Teva Wall WB1860 Wall GENERAL PRODUCT INFORMATION: CAUTION - RISK OF FIRE This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. These fixtures are intended to be installed utilizing NEC compliant junction boxes. This product is safety listed for damp locations. Use minimum 90°c supply conductors.
PAGE 2
MISE EN GARDE - RISQUE D'INCENDIE Ce produit doit être installé selon le code d’installation pertinent , par une personne qui connaÎt bien le produit et son fonctionnement ainsi que les risques inhérents Les fils d’alimentation doivent convenir pour 90°c. 1A 4 FLEURON COURT DIFFUSER VIS DE FLEURON 5 1 VIS CAPUCHON ENCOCHE AMPOULE 3 2 ABAT-JOUR DOUILLE 1 FLEURON LONGUE 1 Installez la fleuron courte sur le haut de luminaire et le fleuron long sur le bas de luminaire à l'aide des vis capuchon.
PAGE 3
ADVERTENCIA - RIESGO DE INCENDIO Este productor debe ser instalado segun el codigo de instalacion aplicable por una persona que conozca la constussion y el funcionamiento del producto y los riesgos que supone. Conductores de alimentacion 90°c Min.
PAGE 4
SAVE THESE INSTRUCTIONS! 7400 Linder Ave, Skokie, IL 160077 800.969.3347 www.Feiss.com © 2017 Feiss.All rights reserved.The "Feiss" graphic is a registered trademark of Feiss. Feiss reserves the right to change specifications for product improvements without notification.