Full Product Manual

ManualsBrandsFeit Electric ManualsCommercial Lighting4 ft. 64- Watt Equivalent Integrated LED White Motion Shop Light with Remote

THANK YOU

We appreciate the trust and condence you have placed in Feitl Electric through the purchase of this product.

We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your

home improvement needs. Thank you for choosing Feit Electric!

Questions, problems, missing parts?

Before returning to store, visit feit.com/help for further assistance.

READ BEFORE INSTALLATION

SAVE THESE INSTRUCTIONS

USE AND CARE GUIDE

4FT SHOP LIGHT WITH MOTION AND REMOTE

Model: SHOP/4/840/MM

VER003

Summary of content (6 pages)

PAGE 1
Model: SHOP/4/840/MM USE AND CARE GUIDE 4FT SHOP LIGHT WITH MOTION AND REMOTE READ BEFORE INSTALLATION SAVE THESE INSTRUCTIONS Questions, problems, missing parts? Before returning to store, visit feit.com/help for further assistance. VER003 THANK YOU We appreciate the trust and confidence you have placed in Feitl Electric through the purchase of this product. We strive to continually create quality products designed to enhance your home.
PAGE 2
Table of Contents Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Pre-Installation. . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 3
Pre-Installation NOTE: Hardware images are for illustration purposes only. Actual product size may vary. TOOLS REQUIRED Phillips screwdriver PACKAGE CONTENTS AA BB JJ Part CC KK DD EE FF GG HH II LL Description Quantity AA 6 in.
PAGE 4
Chain and V-Hook Installation 1 4 Turning off the power □ Turn the power OFF at the switch, fusebox, or the circuit breaker. Attaching the hanging chain □ Hang the hanging chain (AA) onto the hanging hooks (GG) and plug in the power cord to the outlet. Ceiling 2 GG Attaching hanging hooks AA □ Attach two hanging hooks (GG) to the ceiling. The spacing between the hanging hooks should be 46 in. If the ceiling is concrete or drywall, drill two holes and insert two anchors (EE). 46 in.
PAGE 5
Fixture Flush Mount Screw Installation 1 2 Turning off the power □ Turn the power OFF at the switch, fusebox, or the circuit breaker. Attaching the anchors and screws □ Using the provided mounting template (LL), drill two holes 44 in. apart. Be sure to offset the right hole (or opposite side) by 5/8 in. □ If the ceiling is concrete or drywall, drill two holes and insert two anchors (EE). 5/8 in. offset 44 in. EE DD 3 offset this screw by 5/8 in. D 0.079 – 0.099 in.
PAGE 6
How to Use Wireless Remote Turns unit ON & OFF Decreases light level Increases light level Set to highest brightness Press and hold for three seconds to reset to default setting Lowest light level Set motion sensor distance Unit will turn off after pre-selected time if no motion is detected Group Programing 1 Group Programing □ Program multiple fixtures at once by pressing down and holding a light setting. □ While holding the desired light setting, walk closer towards the light until it flashes.