Full Product Manual
2
Table of Contents
Safety Information
For your safety, always remember to:
□ Turn off the power supply at the fuse or circuit breaker box
before you install the xture.
□ Double-check all connections to be sure they are
tight and correct.
□ Wear rubber soled shoes and work on a sturdy
wooden ladder.
□ Account for small parts and destroy packing material, as these
may be hazardous to children.
WARNING: RISK OF SHOCK. House electric current can
cause painful shock or serious injury unless handled properly.
CAUTION: Turn off the main power at the circuit breaker
before installing the xture, in order to prevent possible shock.
NOTICE: All connections must be in accordance with local electrical
standards and the National Electrical Code (N.E.C.) or Canadian
Electrical Code (C.E.C) as appropriate.
Remove the xture and the mounting package from the box and make
sure that no parts are missing by referencing the illustrations on the
installation instructions.
LIMITED WARRANTY
This product is warrantied to be free from defects in workmanship and materials for up to 5 years from date of purchase.If the product fails within the
warranty period, please contact Feit Electric atinfo@feit.com, visit feit.com/contact-us or call 1-866-326-BULB (2852) for instructions on replacement or
refund.REPLACEMENT OR REFUND IS YOUR SOLE REMEDY.EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTIES ARE
LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IS HEREBY EXPRESSLY EXCLUDED.
Some states and provinces do not allow the exclusion of incidental or consequential damages, so the above limitation or exclusion may not apply to
you.This warranty gives you specic legal rights, and you may also have other rights which vary from state to state or province to province.
IMPORTANT: THIS FIXTURE IS INTENDED TO BE ONLY INSTALLED
DIRECTLY BENEATH A CEILING-MOUNTED RECEPTACLE.
WARNING: Changes or modications to this unit not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
IMPORTANT SAFETY INSTRUCTIONS - This portable light-emitting-diode (LED) luminaire has a polarized plug (one blade is wider than the other) as a feature
to reduce risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit squarely in the outlet, reverse the plug. If it still does
not fit, contact a certified electrician. Never use with an extension cord unless the plug can be fully inserted. Do not alter the plug.
FCC STATEMENT: This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation
between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected. Consult the dealer or an experienced radio/TV technician for help. Any changes or modications not expressly approved
by the manufacturer could void the user’s authority to operate the equipment.
NOTE: This xture is designed for use in a circuit protected
by a fuse or circuit breaker. It is also designed to be installed in
accordance with local electrical codes. If you are unsure about
your wiring, consult a qualied electrician or local electrical
inspector, and check your local electrical code.
Supplier’s Declaration of Conformity:
47 CFR § 2.1077 Compliance Information
Responsible Party:
Feit Electric Company
4901 Gregg Road,
Pico Rivera, CA 90660, USA
562-463-2852
Unique Identifier:
SHOP/4/840/MM
Safety Information ...............................................................................................2
Warranty .......................................................................................................2
Pre-Installation ..................................................................................................3
Tools Required .................................................................................................3
Hardware Included ..............................................................................................3
Installation Options ............................................................................................4-5
How to Use Wireless Remote ........................................................................................6
Group Programming ..............................................................................................6