Full Product Manual

5 FEIT.COM
Please contact 1-866-326-BULB (2852) for further assistance.
Fixture Flush Mount Screw Installation
□ Turn the power OFF at the switch, fusebox, or the circuit breaker.
□ Turn the power ON at the switch, fusebox, or the circuit breaker.
□ Turn the xture ON/OFF using the provided remote.
□ Using the provided mounting template (LL), drill two holes 44 in. apart. Be sure to offset the right hole (or opposite side) by 5/8 in.
□ If the ceiling is concrete or drywall, drill two holes and insert two anchors (EE).
□ Lift the xture (FF) up to the mounting screws (DD) tting into place thru large openings. The xture should be rmly xed
against the mounting screws (DD). Push the xture forward or backward to lock in place. Plug in the power cord to the outlet.
4
Turning on the power
2
Attaching the anchors and screws
3
Securing the xture
44 in.
EE
5/8 in.
offset
offset this
screw by
5/8 in.
D 0.079 – 0.099 in.
Ceiling
5
Linking multiple shoplights (optional)
□ Link up to six.
DD
DD
1
Turning off the power