Full Product Manual

How to Use Wireless Remote
Turns unit ON & OFF Decreases light level
Increases light level
Lowest light level
Set motion sensor
distance
Set to highest brightness
Press and hold for three seconds
to reset to default setting
Unit will turn off after
pre-selected time if no
motion is detected
Group Programing
1
Group Programing
□ Program multiple xtures at once by pressing down and holding a light setting.
□ While holding the desired light setting, walk closer towards the light until it ashes.
□ Fixtures will verify new setting has been received by ashing.
□ While holding the desired light setting, walk closer towards the light until it ashes.
NOTE: Fixture uses Microwave technology for motion detection
which could interfere with WiFi within 5 ft of the unit.