Full Product Manual

ManualsBrandsFeit Electric ManualsCommercial Lighting14000 Lumens ProSeries Ultra Bright Flood IP65 Weatherproof Plug-In Adjustable Dual-Head Tripod LED Work Light

IMPORTANT SAFETY INSTRUCTIONS

AND INSTALLATION GUIDE

Item #: WORK14000XLTPPLUG

Dual Head Work Light with Metal Tripod

READ BEFORE INSTALLATION

SAVE THESE INSTRUCTIONS

Questions, problems, missing parts? Before returning to the store,

call Feit Electric Customer Service

8 a.m. - 5 p.m., PST, Monday - Friday

We appreciate the trust and confidence you have placed in Feit Electric through the purchase of this Dual Head Work Light. We strive to continually create quality products

designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.

Thank you for choosing Feit Electric.

1-866-326-BULB (2852)

FEIT.COM

Summary of content (5 pages)

PAGE 1
Item #: WORK14000XLTPPLUG IMPORTANT SAFETY INSTRUCTIONS AND INSTALLATION GUIDE Dual Head Work Light with Metal Tripod READ BEFORE INSTALLATION SAVE THESE INSTRUCTIONS Questions, problems, missing parts? Before returning to the store, call Feit Electric Customer Service 8 a.m. - 5 p.m., PST, Monday - Friday 1-866-326-BULB (2852) FEIT.COM We appreciate the trust and confidence you have placed in Feit Electric through the purchase of this Dual Head Work Light.
PAGE 2
Table of Contents Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 FCC Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Pre-Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Assembly . . . . . . . . . . . . . .
PAGE 3
Pre-Assembly PARTS INCLUDED NOTE: Parts not shown to actual size.
PAGE 4
Assembly 1 2 Loosen the Tripod Locking Knob (KK) and move the three legs out and down, then tighten the Tripod Locking Knob (KK) (See Fig. 1). Use the included Hex Wrench (HH) to remove the Hex Screws (JJ) from the Lamp Mounting Bar (CC). Place the Carrying Handle (GG) on the Lamp Mounting Bar (CC) and align it with the screw hole. Place the Hex Screws (JJ) back and tighten them to hold the handle in place (see Fig. 2). Fig. 1 Fig.
PAGE 5
Assembly 5 6 Insert the Handle Locking Knob (II) throught the Y-shape cord and into the tripod. Turn the Handle Locking Knob (II) clockwise to hold the Y-Shape cord in place (see Fig. 5). Rotate the height adjustment knobs counter-clockwise to loosen them and pull up the tripod to the desired height. Rotate the height adjustment clockwise to secure the tripod in place. Fig.