3-Axis Gimbal for Mirrorless and DSLR Cameras Guilin Feiyu Technology Incorporated Company User Manual EN V 2.
1.
Included Accessories Thumb screw Shutter release USB cable cable for Sony cameras (3.5 audio to multi) Installation Way Shutter release cable Shutter release cable 4 Batteries for Panasonic cameras for Canon cameras (type: 18650) (3.
2. User Guide Attention: please read the following instructions before turning on the power on the gimbal 1 Insert the Batteries Prior to use, please be sure to fully charge the batteries. Remove the handle, insert 2 pcs 18650 batteries and tighten the handle. 2 Attach Camera (1)Remove the quick plate from the gimbal. Insert the provided 1/4-20 screw into a mounting hole on quick plate.For a front-heavy camera(i.e.
（2） After installing the camera, press and hold the anti-column, place the quick plate with mounted which the camera is mounted on the clamping plate, and tighten the screws. Anti-column Thumb screw 3 Balance Adjustment Adjust the centre of gravity balance of the three axis (see section 9. Balance Adjustment for details) then turn on the gimbal. ! Note: centre of gravity imbalance can lead to stable performance degradation, and may not balance the camera.
4 Power On/Power Off Power�on： press and hold the function button until the green light on and you hear the tone. Power�o�： press and hold the function button until the red light changes from quick flashing to constant and you hear the tone. 3.
Explanation of LED Indicator Status The current mode of the gimbal can be identified by the indicator status.
Manual Lock Pull to the required angle and hold for half a second to lock in that position. (The tilting axis and panning axis in lock mode can be manual. The tilting axis can be manually locked in the panning mode.) Take the tilting axis as an example: 2 1 Hold the camera and change its angle in tilting axis direction. Keep this position for half a second, the current angle will be locked manually.
Tilting Function Button Function Button 2.Four taps on function button, gimbal will enter the autorotation mode . Panning 3. Set the gimbal start rotation position: pull the tilting axis or panning axis to the start position by hand,click the function button to record the start position. Tilting Panning Function Button 4. Pull the gimbal (which can be rotated more than one turn) to the rotation path you want to set, and then click the function button to record the end position. 5.
Photograph 7 The shutter button can take pictures via the shutter release cable. 4. Charging Manual photograph: click the shutter button to focus, click again within 3s to take pictures.If there is no operation within 3 seconds , the focus state is cleared. Automatic continuous shooting: shutter button long press 3s or more, gimbal "drop" sound and enter the automatic continuous shooting mode, the default 5s shot once. One tap the shutter button to exit the automatic continuous shooting mode.
5. Download and Connect App 1 Download "Feiyu ON" and Install It. (2) Android version: (1) iOS version: Feiyu ON Feiyu ON App Store 2 Feiyu ON Feiyu ON GuiLin FeiYu Technology Incorporated Company GuiLin FeiYu Technology Incorporated Company Download *Please scan the two-dimensional code via the browser. Google play Connecting App Download Start the App on your smartphone,follow the instructions to connect the Feiyu On App with gimbal via bluetooth.
6. Gimbal Initialization You can initialize your gimbal when: （1）Camera is not level （2）If not used for a long time （3）In case of extreme temperature variations 2 Adjusting steps: 1 Five taps on the function button: the motor stops working after the vioce "drop". The blue light is constant on. 11 3 Place the gimbal on a flat surface. The gimbal will automatically initialize when it detects the non movement.
7. Firmware Upgrade (1) Option 1: connect the gimbal with PC via micro USB cable to upgrade the firmware. Please visit the official website www.feiyu-tech.com to download the relevant software for upgrading, including USB driver,firmware upgrade software and product firmware. Install the relevant software, decompress the firmware files and upgrade according to the firmware upgrade instructions.
8. Parameters 176.5mm 219mm 376mm Titling Angle Rolling Angle Panning Angle 360° 360° Tilting Increments 2°/s ~ 75°/s Life Time 12 Hours (center of gravity balance) Adaption Sony NEX-5N/NEX-7 and other N-series, SONY A7RII / ILCE-7R / ILCE-5100, Panasonic LUMIX GH4, Canon 5D Mark III (with standard lens), and other cameras with similar dimensions with weight less 2000g（the camera weight including the accessories of lens and etc.
9. Balance Adjustment STEP��1 Balance Adjustment of the Tilting Axis Adjust the center of gravity of the camera in two steps to the axis of rotation of the tilting axis. （1）Adjust the center of gravity position of the tilting axis up and down: point the camera lens down, adjust cross arm to maintain the level, as shown in figure ①, let go and observe the state of rotation. Adjust the balance via adjust the sliding arm up and down(refer to figure ② ③). * After adjustment, be sure to tighten the lock screw.
（2）Adjust the center of gravity position of the tilting axis forward and backward: point the camera lens horizontal forward, adjust cross arm to maintain the level as shown in figure ①,let go and observe the state of rotation. Loosen the screw on the bottom of the camera and adjust the balance by sliding the adjustment skateboard up and down at the bottom of the camera(refer to figure ② ③). * After adjustment, be sure to tighten the lock screw.
STEP��2 Balance Adjustment of the Rolling Axis When the balance adjustment of tilting axis completed, the balance of the rolling axis can be adjusted: keep the gimbal socket connector vertical to the ground with the hand-held control handle as shown in figure ①, leave the gimbal powered off and observe the balance. Loosen the lock screw and slide the cross arm left and right to adjust the roll(refer to figure ② ③). * After adjustment, be sure to tighten the lock screw.
STEP��3 Balance Adjustment of the Panning Axis Best balance When the balance adjustment of tilting axis and rolling axis is completed, the balance of the panning axis can be adjusted. Keep the gimbal socket connector in the horizontal position, adjust hand-held panning axis as shown in figure ①,let go and observe the state of rotation. Loosen the lock screw on the panning and slide the vertical arm forward and backward to adjust (refer to figure ② ③).
D I S C L A I M E R Any use for illegal purposes prohibited.Users are responsible for use products. The company assumes no liability for any risks related to or resulting from the debug and use of this product (including the direct, indirect or third-party losses). For any unknown sources of using, we will not be at any services.
Guilin Feiyu Technology Incorporated Company Due to software and hardware improvements, your actual product might differ from the descriptions and pictures in this user manual. You can get the latest user manual from the official website.
