User Manual-a2000

11
1
2
3
Five taps on the
function button:
the motor stops
working after the
vioce "drop". The
blue light is constant
on.
Place the gimbal on a flat surface. The gimbal
will automatically initialize when it detects the
non movement. The blue light will flash three
times and initialization ends,otherwise, the
initialization fails.
6. Gimbal Initialization
Adjusting steps:
You can initialize your gimbal when:
（1） Camera is not level
（2） If not used for a long time
（3） In case of extreme temperature variations
After the initialization
is successful, click the
function button to
wake up.
Note: if the initialization is not successful for a long time, long press
the function button to turn off the gimbal,restar it and then initialize.