User Manual-a2000

3. Modes / Functions

Power�on： press and hold the function button until the green light on and you hear the tone.

Power�o�：

press and hold the function button until the red light changes from quick ﬂashing to constant

and you hear the tone.

Trigger button

Lock

Function button

Two taps

One tap

Function

Three taps

Reset

Long press

Return to panning mode, tilting and rolling to return to initial level

Explanation

Function Explanation

Panning Mode

Panning and Tilting Mode

Under panning and tilting mode, control the rolling axis by moving the

joystick to the left or right, and the control angle is - 30 °~+ 30°

Rotate horizontal 180°

Make the camera lens rotate 180 °(the current mode of work does not

change)

Default mode

Operating Instructions

In the panning mode or panning and tilting mode, press and hold lock

shortcuts to enter the lock mode, release to return before mode

Four taps

Both the panning and tilting directions can be rotated

Autorotation Mode

Five taps

After the initialization succeeds or fails, you can click the function button

to wake up the gimbal

Initialization

Power On/Power Oﬀ