User Manual-a2000

8
5.The gimbal will go to the start position and
start the autorotation function.
4. Pull the gimbal (which can be rotated more
than one turn) to the rotation path you want
to set, and then click the function button to
record the end position.
3. Set the gimbal start rotation position: pull
the tilting axis or panning axis to the start
position by hand,click the function button to
record the start position.
2.Four taps on function button, gimbal will
enter the autorotation mode .
Exit operations：
1.Click the function button to exit the autorotation mode during automatic rotation.
2.Two taps the trigger button to exit the autorotation mode during setting the automatic rotation.
Function
Button
Tilting
Panning
Function
Button
Tilting
Panning
Function
Button