English Français Español Deutsch Italiano Nederlands Svenska Dansk Suomi Norsk Русский Get More Done Today ™ Polski 120-2 120C-2
C K B A D B E F H I G J
Dear Customer, Thank you for buying a Fellowes Commercial Shredder. We have made many improvements in our commercial shredder since its introduction in 1982. We are confident that it offers you the greatest value for your money in its product category today. We hope it meets – or even exceeds – your expectations. To ensure years of safe, efficient use, please read these few pages about your new shredder.
English Product Profile This product is built to shred paper, staples, small paper clips and credit cards. It is not built to shred adhesive labels, transparencies, newspaper, cardboard, large paper clips, or plastic (other than credit cards). Attempting to shred items not intended for this shredder may cause damage.
English Set-Up • Turn retractable feet (D) to outward position. This will improve stability. The feet should be turned outward if shredder will not be placed between furniture. • Pull waste basket drawer (A) completely out of cabinet. • Put waste bag in basket (sample bags provided). Allow edges to overhang. Contact Fellowes to order more bags. (Part #36054). • Slide waste basket drawer (A) into cabinet. The shredder will not operate if drawer is not pushed all the way into cabinet.
English To empty waste basket If basket full light (I) is on, follow these steps until light turns off. 1 • Press manual forward button (G) to finish shredding any paper in paper entry. – Press control switch (E) to the off [O] position. – Open the waste basket drawer (A) and remove full bag. – Place new bag in basket, then slide drawer into cabinet. 2 • Press and hold control switch (E) in the reverse [R] position for a few seconds to clear paper shreds that have collected under cutting cylinders.
English Troubleshooting If there is a problem with your shredder, check these symptoms and remedies. If you cannot solve the problem, call your local dealer or contact Fellowes directly. Do not open shredder head to attempt repair. You could be exposed to serious electric shock and will void the warranty. Symptom Remedy Ready Light (F) will not light Make sure shredder is plugged in and the control switch (E) is in the automatic [I] position.
English Fellowes conducts extensive testing to ensure that these shredders are capable of meeting all of the specifications listed in the Product Profile (see page 3). However, the actual sheet capacity is dependent on a number of factors including the type and weight of paper, the humidity, the voltage level of the power source, the temperature of the motor, and the care with which the operator feeds the paper.
Declaration of Conformity Fellowes Yorkshire Way, West Moor Park, Doncaster, South Yorkshire, DN3 3FB England declares that the product Models 120-2 and 120C-2 conform with the requirements of the Low Voltage Directive (73/23 EEC) and the Electromagnetic Compatibility Directive (89/336 EEC) and the following harmonized European Normes (EN Standards) and IEC Standards.