Product Warranty

KEY FEATURES AND CONTROLS

CONTROL PANEL

ENGLISH

Model 200C/130C

A. Shredder Lid

B. Manual Feed Slot

C. Casters (200C only)

D. Disconnect Power Switch

1. OFF

2. ON

E. See Safety Instructions

F. Control Panel (see below)

G. Pull-Out Bin

1. Overheat (red)

2. Remove Paper (red)

3. Bin Full (red)

4. Bin Open (red)

5. Reverse

6. On/Off (blue)

7. Start

1. 2. 3. 4.

5. 6. 7.

IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!

• Operation,maintenance,andservicerequirementsarecoveredintheinstruction

manual. Read the entire instruction manual before operating shredders.

• Keepawayfromchildrenandpets.Keephandsawayfrompaperentry.Alwaysset

to off or unplug when not in use.

• Keepforeignobjects–gloves,jewelry,clothing,hair,etc.–awayfromshredder

openings.Ifobjectenterstopopening,switchtoReverse(

)tobackoutobject.

• Neveruseaerosolproducts,petroleumbasedlubricantsorotherflammable

products on or near shredder. Do not use canned air on shredder.

• Avoidtouchingexposedcuttingbladesundershredderlid.

• Unplugshredderbeforecleaningorservicing.

• Donotuseifdamagedordefective.Donotdisassembleshredder.

Do not place near or over heat source or water.

• ThisshredderhasaDisconnectPowerSwitch(D)thatmustbeintheON

(I)

positiontooperateshredder.Incaseofemergency,moveswitchtoOFF

(O)

position.Thisactionwillstopshredderimmediately.

• Shreddermustbepluggedintoaproperlygroundedwalloutletorsocketofthe

voltageandamperagedesignatedonthelabel.Thegroundedoutletorsocket

mustbeinstalledneartheequipmentandeasilyaccessible.Energyconverters,

transformers,orextensioncordsshouldnotbeusedwiththisproduct.

• FIREHAZARD–DoNOTshredgreetingcardswithsoundchipsorbatteries.

• Forindooruseonly.