PAPER SHREDDER Personal Series MODEL Shredmate USE AND CARE MANUAL PLEASE READ AND SAVE THIS MANUAL WITH YOUR ORIGINAL RECEIPT Customer Service: 1-800-955-0959
PARTS OF THE SHREDDER D A ASSEMBLY E C Safety Tab B A. Paper entry B. Basket C. Auto-start sensor D. Power disconnect switch E. Shredder head Figure 1 NOTE: This shredder will operate only when used with the supplied basket. The supplied basket has a built-in safety feature which prevents the shredder from operating if used with any other basket or if improperly assembled. To assemble shredder This shredder contains sharp edges on the underside of the shredder head.
PRODUCT USAGE GUIDE Sheet capacity*: Shred type: Shred size: Entry width: Recommended use: Operation time: Shredmate 4 sheets folded Confetti 4 x 22 mm 114 mm 10-20 shredding passes per day Short time operation 4 min. *Sheet capacity measured with 20 lb., 8-1/2" x 11" paper with the shredder operating at rated voltage. Different paper weights, humidity, and electrical currents will affect capacity.
IMPORTANT SAFEGUARDS OPERATION • NEVER insert hands or fingers into paper entry as serious personal injury may result. This product features an auto-start sensor. This sensor will turn on the cutting blades whenever anything is inserted into the paper entry (while the power switch is in the AUTO position). For the safety of pets and children, we recommend always moving the power switch to OFF and unplugging whenever the shredder is unattended or not in use. • THIS MACHINE IS NOT A TOY.
Cool-Down Cycle This shredder is protected with a special safety feature which prevents the motor from overheating with extensive use. When shredding is attempted beyond the machine's maximum running time, the shredder will automatically shut off its motor until it has cooled to an acceptable operating level. This is normal and the shredder will return to operation after the cool-down or “off” period. See Product Usage Guide (page 2) for maximum running time and related cooling “off” time.
7° ° ° ° }Ã 4HIS PRODUCT IS CLASSIlED AS %LECTRICAL AND %LECTRONIC %QUIPMENT 3HOULD THE TIME COME FOR YOU TO DISPOSE OF THIS PRODUCT PLEASE ENSURE THAT YOU DO SO IN ACCORDANCE WITH THE %UROPEAN 7ASTE OF %LECTRICAL AND %LECTRONIC %QUIPMENT 7%%% $IRECTIVE AND IN COMPLIANCE WITH LOCAL LAWS RELATING TO THIS DIRECTIVE &OR MORE INFORMATION ON THE 7%%% $IRECTIVE PLEASE VISIT WWW FELLOWESINTERNATIONAL COM 7%%% ÀiV #E PRODUIT EST CLASSÏ DANS LA CATÏGORIE i ²QUIPEMENT ÏLECTRIQUE ET ÏLECTRONIQUE w ,ORSQUE VO
ÀÜi}> $ETTE PRODUKTET KLASSIlSERES SOM ELEKTRISK OG ELEKTRONISK UTSTYR (VIS DU HAR TENKT Ì BORTSKAFFE DETTE PRODUKTET VENNLIGST SE TIL AT DU GJR DETTE I OVERENSSTEMMELSE MED DET EUROPEISKE 7%%% DIREKTIVET 7ASTE OF %LECTRICAL AND %LECTRONIC %QUIPMENT OG IFLGE LOKALT LOVVERK FORBUNDET MED DETTE DIREKTIVET &OR MER INFORMASJON OM 7%%% DIREKTIVET VENNLIGST BESK WWW FELLOWESINTERNATIONAL COM 7%%% *Ã 5FO QSPEVLU [PTUB [BLMBTZmLPXBOZ EP HSVQZ VS[ŕE[FŴ FMFLUSZD[OZDI J FMFLUSPOJD[OZDI 8 DFMV QP[CZDJB T
Declaration of Conformity Fellowes Manufacturing Company Yorkshire Way, West Moor Park, Doncaster, South Yorkshire, DN3 3FB England declares that the product Model ShredMate conforms with the requirements of the Restriction of Hazardous Substances Directive (2002/95/EC), the Low Voltage Directive (73/23 EEC) and the Electromagnetic Compatibility Directive (89/336 EEC) and the following harmonized European Normes (EN Standards) and IEC Standards.