User Manual

ManualsBrandsFender ManualsReceivers and AmplifiersFM 100H

INPUTS

VOLUME TREBLE BASSMID VOLUME TREBLE BASSMIDDRIVE REVERB

FOOT

SWITCH

PRE

OUT

PWR

FENDER MUSICAL INSTRUMENTS

CH SELECT MID

CONTOUR

MORE DRIVE

Your new FM 100H amplifier delivers world–class Fender

tone and world–standard Fender

quality:

• 100W output power into 4 ohms

• Selectable Normal and Drive channels with

independent volume and tone controls

• MORE DRIVE pre-amp boost for instant gain saturation

and harmonically rich leads

• MID-CONTOUR button allows for many different

variations in distortion—from Rock to Blues to Metal to

whatever!

• Classic Fender

spring Reverb

• Fender

“touch-sensitive” circuit design simulates the

feel of tube distortion

• PRE-AMP OUT and POWER-AMP IN jacks allow you to

connect external effects devices, other amplifiers or

sound/recording equipment to your FM 100H

• FOOTSWITCH jack for use with a 2-button Fender

footswitch (included). A footswitch provides remote

channel selection and drive/more drive switching

Thank you for choosing Fender

—The W

orld’

s most

popular instr

ument amplifiers—since 1946

A. INPUTS - Plug your guitar in here: INPUT 1 is normal

sensitivity for most guitars, INPUT 2 is lower sensitivity

for guitars with high output (active) pickups.

B. VOLUME - Adjusts the loudness of the Normal

channel.

C. TREBLE/MID/BASS - Adjusts the tone of the Normal

channel in the high/middle/low frequency ranges.

D. DRIVE CHANNEL INDICATORS -

Yellow LED ON







Drive channel is active

Red LED ON







More Drive channel is active

DRIVE - Adjusts the distortion level of the Drive

channel.

F. CHANNEL SELECT -

Button OUT selects the Normal channel

Button IN selects the Drive channel

G. VOLUME - Adjusts the loudness of the Drive channel

together with DRIVE {E}.

H. MORE DRIVE - Boosts the intensity and range of the

DRIVE control {E}.

Button OUT selects the Drive channel

Button IN selects the More Drive channel

I. TREBLE/MID/BASS - Adjusts the tone of the Drive

channel in the high/middle/low frequency ranges.

MID-CONTOUR - Activates a “scooped” midrange

EQ, useful for modern distortion sounds in the Drive

channel.

K. REVERB - Adjusts the Reverb level for both channels.

L. FOOTSWITCH - Plug in the included 2-button Fender

footswitch to enable remote switching of CH SELECT,

and DRIVE/MORE DRIVE. When connected, the

footswitch overrides the front panel buttons.

M. PRE OUT/PWR IN - (1) Effects Loop - Connect PRE

OUT to an effects device input, then connect the

effects device output to PWR IN. (2) Multiple Amps -

Connect the primary amplifier’s PRE OUT to the

auxiliary amplifier’s PWR IN. The primary amp is used

to control all auxiliary amps. (3) Recording or

Reinforcement - Connect PRE OUT to sound

equipment’s input.

Both jacks use a TS (Tip-Sleeve) standard type

plug for connections. PRE OUT includes onboard tone

shaping.

N. POWER INDICATOR - Illuminates when the amplifier

is on.

✧

ff ee nn dd ee rr .. cc oo mm

✧

NOTE: The footswitch and power cord are stored behind the front grille of the FM100H cabinet. Access by pulling on

both tabs at the bottom edge of the grille.